Buy Burrs Online in Australia
Carbide burrs (rotary burrs and rotary files) at AIMS Industrial. We list over 200 burrs from Sutton Tools, Pferd, Bordo, Klingspor, P&N and Saber, in the common shapes (cylindrical, ball, tree, flame, oval, cone and included angle) and in double cut, aluminium cut and end cut versions. They run in die grinders, air tools and pendant drills for deburring, shaping, weld cleaning and chamfering metal, with miniature, extended shank and bearing-guided edge burrs for finer work.
What's in the range
| Group | What the range includes |
|---|---|
| Cylindrical burrs | Square end, radius end and end cut versions, including Sutton B200, B201 and B300 series, Bordo, P&N, Klingspor and Pferd ZYA and WRC. |
| Ball and ball nose burrs | Sutton B202, Bordo, Pferd KUD and Klingspor ball end burrs, in single and double cut. |
| Tree, flame and oval burrs | Pointed and radius end tree shapes (Sutton B204 and B205, Pferd SPG and RBF), flame shapes (Sutton B206, Bordo, P&N) and oval shapes. |
| Cone, taper and included angle burrs | Cone and taper shapes with radius end, inverted taper burrs, and included angle burrs including a Saber non-ferrous version. |
| Aluminium cut burrs | Sutton B215, B316 and B317 aluminium cut burrs, and Pferd burrs listed as C ALU. |
| Miniature and long reach | Pferd miniature shank burrs in cylindrical, ball, flame and oval shapes, long and extended shank burrs, and Sutton long reach versions. |
| Edge and guided burrs | Pferd edge burrs with bearing guides, and an edge burr system with guide. |
Choosing a carbide burr
Pick the shape for the job first: cylindrical burrs for flat surfaces and edges, ball burrs for pockets and radii, tree and flame burrs for contours and tight corners, and cone or included angle burrs for chamfers and bevels. Then choose the cut. Double cut burrs break chips smaller and run smoother on steel, aluminium cut burrs have a coarse single-cut form that clears soft material, and finer cuts leave a better finish. Check the shank size against your die grinder collet, and keep the tool speed within the maker's recommended range.
Always check the data sheet. Confirm the shape, shank size, cut and maximum speed suit your tool and material.
Related ranges
See carbide burr sets, die grinders and mounted points. Brands: Sutton Tools, Pferd, Bordo and Klingspor.
Order from AIMS Industrial
Not sure which burr suits your job? Call us on (02) 9773 0122, contact our team or request a quote. We have supplied Australian industry since 1988 and can help you choose by material, shape and tool.
Carbide burr FAQs
What is a carbide burr used for?
A carbide burr is a rotary cutting tool used in a die grinder or pendant drill to remove burrs, shape and blend edges, clean up welds and chamfer holes in metal.
What is the difference between single cut and double cut?
Double cut burrs have a cross-cut pattern that breaks chips into smaller pieces, giving smoother cutting and better control on steel. Aluminium cut burrs have a coarser form that clears soft metals without clogging.
Which burr shape should I use?
Cylindrical for flat faces and edges, ball for pockets and radii, tree and flame for contours and corners, and cone or included angle for chamfers. Our range includes each of these shapes.
Do you list burrs for aluminium?
Yes. We list Sutton aluminium cut burrs (B215, B316, B317), Pferd C ALU burrs and a Saber non-ferrous included angle burr.
What shank size do I need?
It has to fit your tool collet. Check the shank size on each listing against your die grinder or drill before ordering.
Can I buy burrs in a set?
Yes. See our carbide burr sets for assorted shapes in a case.