Buy Carbide Burr Sets Online in Australia
Burr sets give you the common carbide shapes in one box for die grinders and other rotary tools. This range has 32 sets from Pferd (11), Bordo (9), Sutton Tools (4), Saber (3), P&N (3) and Klingspor (2).
What's in the range
| Brand | Listings | What's there |
|---|---|---|
| Pferd | 11 | General purpose, premium, aluminium cut, Inox cut, miniature (15 piece) and Allround cutter sets, in 4, 5, 8 and 10 piece sets with 1/4 inch or 6 mm shanks |
| Bordo | 9 | Express Cut tungsten carbide sets in 3, 5 and 8 piece (including 1/4, 3/8 and 1/2 inch cut diameter 8 piece sets), plus automotive and non-ferrous, corner radius, Inox and non-ferrous cut 3 piece sets |
| Sutton Tools | 4 | B900 carbide burr sets, 5 piece, 1/4 inch shank, in an ABS case |
| Saber | 3 | 3 piece and 5 piece burr sets, and an 8020-S3 set with 1/4 inch heads |
| P&N | 3 | Double cut solid carbide 5 piece workshop sets with 6 mm or 1/4 inch shanks, and a 5 piece carbide burr set |
| Klingspor | 2 | Tungsten carbide 5 piece burr sets with 6 mm and 6.35 mm shafts |
Choosing a burr set
First check the shank: 6 mm and 1/4 inch (6.35 mm) are close but not interchangeable, so match your tool's collet. Then choose the cut for the material. Aluminium and non-ferrous cuts are made for soft metals that clog a standard cut, Inox cuts are for stainless steel, and general purpose double cut suits mixed steel work. Pick the set that holds the shapes you use, such as cylinder, ball, tree and cone. Do not run a burr faster than its rated speed, and wear eye protection. Always check the data sheet.
Related ranges
For single burrs see Burrs, and for the tools to drive them see Die Grinders. You may also want Mounted Points and Angle Grinder Accessories.
Order from AIMS Industrial
AIMS Industrial has supplied Australian industry since 1988. Call us on (02) 9773 0122, contact the team or request a quote and we'll help match the right burr set to your job.
Burr Set FAQs
Should I choose a 6 mm or a 1/4 inch shank?
Choose the shank that fits your tool's collet. 6 mm and 1/4 inch (6.35 mm) are very close in size, but a collet is made for one or the other, so check before you buy.
What does an Inox or aluminium cut mean?
It is the tooth pattern. An Inox cut is made for stainless steel and an aluminium or non-ferrous cut is made for soft metals that would clog a standard cut. General purpose double cut is for everyday steel work.
Which tool do I run a burr in?
Burrs run in die grinders and other rotary tools with a matching collet. Never exceed the burr's maximum speed, and check the rating on the data sheet.