Hobson MTBMSGM100060 10 x 60mm Tygabolt Sleeve Anchor, Mechanical Galvanised

This page covers the Hobson Tygabolt sleeve anchor (mechanical galvanised finish and class 4.6 designation). It lists 1 item: 10 x 60mm.

A sleeve anchor is fitted through the fixture into a pre-drilled hole and tightened, which expands the sleeve in the hole.

The supplier names this item "Class 4.6". No strength figures are published here, because the supplier description does not give any (manufacturer-stated).

Where this product is used

• Through-fixing an item into a pre-drilled hole, with the sleeve expanded by tightening
• Where an anchor tightened with a nut or head at the surface is wanted

Features

• 1 item: 10 x 60mm
• Mechanical galvanised finish and class 4.6 designation
• Class 4.6 as named by the supplier (manufacturer-stated)
• Supplied as a box of 50

Key specifications

Selecting the right option

Choose the size and length together to suit the fixture and the base material. This page gives no load ratings, base material suitability or hole sizes, because the supplier description does not state them. Check the manufacturer's installation data for the item before you specify it.

Related products

Related anchors: Hobson Tygabolt Sleeve Anchor, Class 4.6, Zinc Yellow, 20 x 160mm, Box of 5, Hobson DSE10 Sleeve Anchor, Mushroom Head, Class 8.8, Zinc Plated, 10 and 12mm and Hobson Flush Head Sleeve Anchor, Zinc Yellow Passivate, 10 and 12mm.