AAP Black Steel 45 Degree Bend, 76mm long, 1/2", 15mm

This AAP black 45° male-male bend is a mild steel fitting with BSP threads. It is supplied in 8 sizes, 1/2" (15mm) to 4" (100mm). A bend changes the direction of a pipe run through an angle with a longer sweep than an elbow. This one turns it through 45° and is threaded outside (male) at both ends. A is the length and R the radius.

It is made to BS EN 10241:2000, as a steel threaded pipe fitting. It has a black finish. All sizes other than unions are sample tested to 5.2 MPa. These are test pressures, not working pressures.

Where this product is used

• Changing the direction of threaded steel pipework by 45° with a longer sweep
• Joining two female threaded fittings at a 45° offset
• General threaded steel pipework

Features

• 8 sizes, 1/2" (15mm) to 4" (100mm)
• Mild steel, black, BS EN 10241:2000
• BSP threads
• Thread: BSP (British Standard Pipe) thread, ISO 7 and AS 1722 Part 1

Key specifications

Choosing the right option

Choose the size to match your pipework. These fittings are BSP threaded, so check that your pipe or fitting is BSP and not NPT before you order.

Related AAP products: AAP Black Steel 90 Degree Bend, Male-Male, AAP Black Steel 45 Degree Elbow, Female-Female, AAP Black Steel Barrel Nipple, AAP Black Steel 90 Degree Elbow, Female-Female.