1/2 in (15 mm) 45 Degree Threaded Elbow, NPT, Galvanised | PEF15G

This AAP 45 degree threaded elbow is a forged carbon steel fitting with NPT thread and a hot dip galvanised finish. It is supplied in 6 sizes, 1/2 in (15 mm) to 2 in (50 mm).

A 45 degree elbow changes the direction of a pipe run by 45 degrees. This one is threaded inside at both ends. B is the outside diameter and C is the centre to end dimension, as lettered on the AAP drawing.

AAP rates its threaded high pressure fittings at 3000 lb (manufacturer-stated). AAP's pressure and temperature chart for screwed and socket welding fittings lists 3000 lb fittings at 3000 psi (about 20.7 MPa) from -20 to 100 degrees F (-29 to 38 degrees C), reducing to 355 psi (about 2.4 MPa) at 1000 degrees F (538 degrees C). AAP lists ASTM A105 carbon steel forgings among the standards for the range.

Where this product is used

• High pressure threaded pipework in carbon steel, as listed by AAP for the 3000 lb range
• Offsetting or changing direction by 45 degrees in threaded pipework
• Easing a bend where a 90 degree turn is too tight

Features

• 6 sizes, 1/2 in (15 mm) to 2 in (50 mm)
• 3000 lb forged carbon steel, ASME B16.11-2009 (manufacturer-stated)
• NPT, hot dip galvanised

Key specifications

Options and part numbers

B and C are the dimensions lettered on the AAP drawing, in millimetres.

Selecting the right option

Choose the size and thread to match your pipework (NPT or BSPT cannot be mixed), and check the thread gender at each end against the fitting it joins.

Related products

See also AAP 3000lb 90 Degree Threaded Elbow, NPT, Galvanised, AAP 3000lb Threaded Equal Tee, NPT, Galvanised, AAP 3000lb Threaded Coupling, NPT, Galvanised and AAP 3000lb Threaded Cap, NPT, Galvanised.