3 in (80 mm) Flanged Tee, Table D | IT80
Available
This AAP galvanised flanged tee has a Table D flange on all three ends and branches a line at 90 degrees. It is supplied in 5 sizes from 3 in (80 mm) to 8 in (200 mm).
AAP lists it as a standard weight (STD) fitting in its galvanised flanged irrigation range, with a wall thickness of 5.5 mm (3 in) to 8.1 mm (8 in). Dimension A is the bore of each end, which works out from the stated wall thickness (for example 77.9 mm on the 3 in), and C is the distance from the centre to the face of each flange.
The catalogue also lists 10 in and 12 in tees. The sizes on this page are the ones AIMS lists, so contact AIMS if you need a larger size or a different branch size.
Where this product is used
- Branch connections off irrigation and water mains
- Pump manifolds and header pipework
- Connecting a flanged valve, meter or instrument to a main
- Dewatering and process water lines
Features
- 5 sizes from 3 in (80 mm) to 8 in (200 mm)
- Table D flange on all three ends (manufacturer-stated)
- Galvanised steel construction, standard weight (STD)
- Wall thickness 5.5 mm (3 in) to 8.1 mm (8 in)
- Equal tee, so the branch is the same size as the run
- Priming sockets can be added on request
Wall thickness and Table D flange details
| Nominal size | Wall thickness (mm) | Flange thickness (mm) | Bolt holes |
|---|---|---|---|
| 3 in (80 mm) | 5.5 | 12 | 4 x 18 mm |
| 4 in (100 mm) | 6.0 | 12 | 4 x 18 mm |
| 5 in (125 mm) | 6.5 | 13 | 8 x 18 mm |
| 6 in (150 mm) | 7.1 | 13 | 8 x 18 mm |
| 8 in (200 mm) | 8.1 | 13 | 8 x 18 mm |
Key specifications
| Specification | Detail |
|---|---|
| Brand | AAP |
| Product | Flanged equal tee |
| Material | Galvanised steel |
| Weight class (manufacturer-stated) | Standard weight (STD) |
| Flange (manufacturer-stated) | Table D, all three ends |
| Wall thickness (manufacturer-stated) | 5.5 mm (3 in) to 8.1 mm (8 in) |
| Priming sockets | Available, add -PS and the socket size to the part number |
| Sizes | 3 in (80 mm) to 8 in (200 mm) (5 sizes) |
Options and part numbers
| Size | Part number | Bore A (mm) | Centre to face C (mm) | Weight (kg) |
|---|---|---|---|---|
| 3 in (80 mm) | IT80 | 77.9 | 85.9 | 8.8 |
| 4 in (100 mm) | IT100 | 102.3 | 104.6 | 12.2 |
| 5 in (125 mm) | IT125 | 128.1 | 124 | 17.8 |
| 6 in (150 mm) | IT150 | 154.1 | 142.7 | 23.2 |
| 8 in (200 mm) | IT200 | 202.7 | 177.8 | 33.9 |
Selecting the right option
This is an equal tee. For a smaller branch, see the reducing tee listed below. Check the flange table on your mating flanges is Table D, because AAP lists other flange tables as available on enquiry only. AAP can add priming sockets to these fittings. Add -PS and the socket size to the part number (AAP lists socket sizes from 1 in to 3 in). Priming sockets on some fittings may carry an extra charge and not every product is ex-stock, so confirm the details with AIMS before ordering. AAP also offers a fabrication service for custom-made fittings, and other flange tables are available on enquiry, so contact AIMS if you need something that is not listed.
Related products
See also AAP Galvanised Flanged Reducing Tee, Table D, AAP Galvanised Concentric Flanged Reducer, Table D, AAP Galvanised Fixed Flanged 90 Degree Elbow, STD Weight, Table D, AAP Slip-On Plate Flange, AS2129 Table D and AAP Natural Rubber Insertion Gasket, Table D.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
3"
Model Number: IT80
-
4"
Model Number: IT100
-
5"
Model Number: IT125
-
6"
Model Number: IT150
-
8"
Model Number: IT200
