(02) 9773-0122
sales@aimsindustrial.com.au
📄 0
AAP Hexagon Bush Galvanised Malleable
AAP Hexagon Bush Galvanised Malleable
AAP Hexagon Bush Galvanised Malleable
AAP Hexagon Bush Galvanised Malleable

1/4 x 1/8 in Galvanised Hexagon Bush | LB0806

$2.00
$2.00
Inc. GST

Available

This AAP galvanised malleable iron hexagon bush is a hot dip galvanised fitting with BSP threads. It is supplied in 39 sizes, 1/4 x 1/8 in (8 x 6 mm) to 6 x 4 in (150 x 100 mm).

A bush reduces a threaded port from a larger size to a smaller one. The size is given as the larger thread first, then the smaller, for example 1/2 x 1/4. It is threaded outside (male) on the larger size and inside (female) on the smaller, with a hexagon for a spanner.

AAP states that these fittings are made to EN 10242:1994 (manufacturer-stated), in blackheart malleable cast iron and delivered hot dip galvanised (manufacturer-stated). AAP states that each fitting is pressure tested to EN 10242 at a minimum hydrostatic pressure of 2068 kPa (equivalent to a minimum pneumatic pressure of 500 kPa) without leakage (manufacturer-stated). AAP recommends a maximum working pressure of 1379 kPa for water and 1034 kPa for gas, steam and compressed air (manufacturer-stated). Working pressures may also be limited by pressure piping codes or industry regulations, so confirm the pressure and temperature for your application with AIMS before you order.

Where this product is used

  • Reducing a female threaded port to a smaller thread
  • Fitting a smaller fitting or gauge to a larger port
  • General galvanised threaded pipework

Features

  • 39 sizes, 1/4 x 1/8 in (8 x 6 mm) to 6 x 4 in (150 x 100 mm)
  • Malleable iron, hot dip galvanised, EN 10242:1994 (manufacturer-stated)
  • BSP threads
  • Test pressure 2068 kPa (manufacturer-stated)

Key specifications

Specification Detail
Brand AAP
Product Galvanised malleable iron hexagon bush
Finish Hot dip galvanised, as prescribed by EN 10242 (manufacturer-stated)
Material Blackheart malleable cast iron to ASTM A197 and ASTM A47, hot dip galvanised (manufacturer-stated)
Thread BSP (British Standard Pipe) thread: parallel internal (Rp) and taper external (R), cut to AS 1722.1 and ISO 7-1 (manufacturer-stated)
Ends Male (external) thread on the outside, female (internal) thread inside, with a hexagon
Applicable standard (manufacturer-stated) EN 10242:1994, threaded pipe fittings in malleable cast iron (manufacturer-stated)
Dimensions (manufacturer-stated) AAP lists its dimensions to BS EN 10242, BS 143 and BS 1256 (manufacturer-stated)
Recommended working pressure (manufacturer-stated) 1379 kPa water; 1034 kPa gas, steam and compressed air
Test pressure (manufacturer-stated) 2068 kPa hydrostatic (equivalent to 500 kPa pneumatic minimum)
Sizes 1/4 x 1/8 in (8 x 6 mm) to 6 x 4 in (150 x 100 mm) (39 sizes)

Options and part numbers

Size Part number Length A (mm) Width C (mm) Weight (kg)
1/4 x 1/8 in LB0806 17 16.3 0.01
3/8 x 1/8 in LB1006 16.3 21.6 0.02
3/8 x 1/4 in LB1008 16.3 21.1 0.02
1/2 x 1/4 in LB1508 19 26.2 0.04
1/2 x 3/8 in LB1510 19 26.2 0.03
3/4 x 1/4 in LB2008 21.6 29.2 0.06
3/4 x 3/8 in LB2010 21.6 29.2 0.06
3/4 x 1/2 in LB2015 23.6 29.2 0.05
1 x 1/4 in LB2508 28.7 28.5 0.09
1 x 3/8 in LB2510 28.7 28.5 0.08
1 x 1/2 in LB2515 28 36.1 0.09
1 x 3/4 in LB2520 28 36.1 0.08
1-1/4 x 3/8 in LB3210 31.4 28.5 0.13
1-1/4 x 1/2 in LB3215 31.4 31.5 0.14
1-1/4 x 3/4 in LB3220 27.4 44.7 0.16
1-1/4 x 1 in LB3225 27.4 44.7 0.13
1-1/2 x 1/2 in LB4015 33 34 0.17
1-1/2 x 3/4 in LB4020 33 36.5 0.18
1-1/2 x 1 in LB4025 31.2 50.8 0.21
1-1/2 x 1-1/4 in LB4032 31.2 50.8 0.15
2 x 1/2 in LB5015 35.3 34 0.26
2 x 3/4 in LB5020 35.3 41.4 0.29
2 x 1 in LB5025 35.3 45 0.3
2 x 1-1/4 in LB5032 38 63 0.34
2 x 1-1/2 in LB5040 38 63 0.28
2-1/2 x 1 in LB6525 38.4 49.5 0.44
2-1/2 x 1-1/4 in LB6532 38.4 60.7 0.47
2-1/2 x 1-1/2 in LB6540 38.4 75.7 0.53
2-1/2 x 2 in LB6550 39.1 75.7 0.46
3 x 1 in LB8025 40.9 49.5 0.64
3 x 1-1/4 in LB8032 40.9 60.7 0.64
3 x 1-1/2 in LB8040 40.9 68.1 0.69
3 x 2 in LB8050 40.9 98 0.78
3 x 2-1/2 in LB8065 40.9 98 0.76
4 x 1-1/2 in LB9440 46.2 68.1 1.09
4 x 2 in LB9450 51.2 83.3 1.14
4 x 2-1/2 in LB9465 46.2 98.1 1.3
4 x 3 in LB9480 51 126 1.34
6 x 4 in LB9694 59.1 147.1 3.22

A is the length and C the overall width of the body, as lettered on the AAP drawing, in millimetres. The C values vary between size pairs in a way that AIMS is confirming with AAP, so they are shown as printed. Sizes are larger first, then smaller. Weights are approximate, in kilograms per piece.

Selecting the right option

Choose the size to match your pipework. These fittings are BSP threaded, so check that your pipe or fitting is BSP and not NPT before you order. Sizes are listed as the larger thread first, then the smaller.

Related products

See also AAP Galvanised Malleable Iron Hexagon Reducing Nipple, AAP Galvanised Malleable Iron Reducing Socket, AAP Galvanised Malleable Iron Square Head Plug and AAP Galvanised Malleable Iron Backnut.
Product Highlights −

This AAP galvanised malleable iron hexagon bush is a hot dip galvanised fitting with BSP threads. It is supplied in 39 sizes, 1/4 x 1/8 in (8 x 6 mm) to 6 x 4 in (150 x 100 mm).

A bush reduces a threaded port from a larger size to a smaller one. The size is given as the larger thread first, then the smaller, for example 1/2 x 1/4. It is threaded outside (male) on the larger size and inside (female) on the smaller, with a hexagon for a spanner.

Resources

File icon
AAP-S2-Galvanised-Malleable-Fittings
Payment & Security
  • Apple Pay
  • Google Pay
  • American Express
  • Mastercard
  • Visa
  • PayPal
  • Union Pay

Secure Checkout. We do not store credit card details

Available Options:
  • 1/4" x 1/8"
    Model Number: LB0806
  • 1/2" x 1/4"
    Model Number: LB1508
  • 1/2" x 3/8"
    Model Number: LB1510
  • 1" x 1/4"
    Model Number: LB2508
  • 1" x 3/8"
    Model Number: LB2510
  • 1" x 1/2"
    Model Number: LB2515
  • 1" x 3/4"
    Model Number: LB2520
  • 1-1/4" x 3/8"
    Model Number: LB3210
  • 1-1/4" x 1/2"
    Model Number: LB3215
  • 1-1/4" x 3/4"
    Model Number: LB3220
  • 1-1/4" x 1"
    Model Number: LB3225
  • 1-1/2" x 1/2"
    Model Number: LB4015
  • 1-1/2" x 3/4"
    Model Number: LB4020
  • 1-1/2" x 1"
    Model Number: LB4025
  • 1-1/2" x 1-1/4"
    Model Number: LB4032
  • 2" x 1/2"
    Model Number: LB5015
  • 2" x 3/4"
    Model Number: LB5020
  • 2" x 1"
    Model Number: LB5025
  • 2" x 1-1/4"
    Model Number: LB5032
  • 2" x 1-1/2"
    Model Number: LB5040
  • 2-1/2" x 1"
    Model Number: LB6525
  • 2-1/2" x 1-1/4"
    Model Number: LB6532
  • 2-1/2" x 1-1/2"
    Model Number: LB6540
  • 2-1/2" x 2"
    Model Number: LB6550
  • 3/8" x 1/8"
    Model Number: LB1006
  • 3/8" x 1/4"
    Model Number: LB1008
  • 3/4" x 1/4"
    Model Number: LB2008
  • 3/4" x 3/8"
    Model Number: LB2010
  • 3/4" x 1/2"
    Model Number: LB2015
  • 3" x 1"
    Model Number: LB8025
  • 3" x 1-1/4"
    Model Number: LB8032
  • 3" x 1-1/2"
    Model Number: LB8040
  • 3" x 2"
    Model Number: LB8050
  • 3" x 2-1/2"
    Model Number: LB8065
  • 4" x 1-1/2"
    Model Number: LB9440
  • 4" x 2"
    Model Number: LB9450
  • 4" x 2-1/2"
    Model Number: LB9465
  • 4" x 3"
    Model Number: LB9480
  • 6" x 4"
    Model Number: LB9694

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Aims white logo

Industrial Supplies Made Simple!

About AIMS

Shop

Contact Details

Milperra NSW 2214, Australia
+61297730122
8:00am - 5:00pm, Mon to Fri

© 2026 AIMS Industrial Supplies.

Home Cart Products
Quote Cart
+ Add more products Submit Quote Request