3 x 3 x 4 in Roll Groove Reducing Tee, Galvanised | GT8094G
Available
This AAP roll groove reducing tee is a galvanised ductile iron fitting for grooved pipe. It is supplied in 3 sizes, 3 x 3 x 4 in (80 x 80 x 100 mm) to 6 x 4 in (150 x 100 mm).
A reducing tee has three grooved ports and a branch of a different size to the run. Each port is grooved to take a roll groove coupling. A is the centre to end dimension, as lettered on the AAP drawing. Sizes are shown as AAP prints them, larger size first. AAP prints the size of GT8094G as 3 x 3 x 4, which does not follow the pattern of the other two, so its port sizes are being confirmed with AAP.
AAP states that its roll groove fittings are made in ductile iron to ASTM A536 Grade 65-45-12 (manufacturer-stated). AAP lists this version as galvanised, and gives its coating as hot dip zinc galvanising (manufacturer-stated). AAP states that roll groove suits standard pipe with cut grooves, or standard and light wall pipe with rolled grooves (manufacturer-stated). AAP states a working pressure of 2500 kPa and a maximum working temperature of 100 °C for this product (manufacturer-stated). Working pressures may also be limited by pressure piping codes or industry regulations, so confirm the pressure and temperature for your application with AIMS before you order.
Where this product is used
- Taking a smaller branch off a grooved pipe run
- Reducing the size of a branch without a separate reducer
- Services within AAP's stated pressure and temperature ratings
Features
- 3 sizes, 3 x 3 x 4 in (80 x 80 x 100 mm) to 6 x 4 in (150 x 100 mm)
- Ductile iron, ASTM A536 Grade 65-45-12 (manufacturer-stated)
- Grooved joint, no welding, threading or flanging
- Working pressure 2500 kPa (manufacturer-stated)
Key specifications
| Specification | Detail |
|---|---|
| Brand | AAP |
| Product | Roll groove reducing tee |
| Finish | Hot dip zinc galvanised (manufacturer-stated) |
| Material | Ductile iron to ASTM A536 Grade 65-45-12 (manufacturer-stated) |
| Ends | Grooved at all three ports |
| Groove | Roll groove, for standard pipe with cut grooves or standard and light wall pipe with rolled grooves (manufacturer-stated) |
| Working pressure (manufacturer-stated) | 2500 kPa |
| Maximum working temperature (manufacturer-stated) | 100 °C |
| Pipe outside diameter (manufacturer-stated) | 3 in 88.9 mm; 4 in 114.3 mm; 6 in 165.1 mm (for the sizes AAP lists) |
| Sizes | 3 x 3 x 4 in (80 x 80 x 100 mm) to 6 x 4 in (150 x 100 mm) (3 sizes) |
Options and part numbers
| Size | Part number | Centre to end A (mm) | Weight (kg) |
|---|---|---|---|
| 3 x 3 x 4 in | GT8094G | - | - |
| 4 x 3 in | GT9480G | 95 | 5.2 |
| 6 x 4 in | GT9694G | 130 | 10.9 |
A is the centre to end dimension, as lettered on the AAP drawing, in millimetres. The size, A and weight for GT8094G are being confirmed with AAP, so A and the weight are not shown for that code. Weights are approximate, in kilograms per piece. A dash means no figure is shown for that size: AAP does not state it, or AIMS is checking it with AAP.
Selecting the right option
Choose the size to match your pipe. AAP lists the pipe outside diameter for each size in its roll groove specification, so check your pipe has that outside diameter and is grooved to AAP's groove dimensions. Each grooved joint also needs a roll groove coupling, which is listed separately.
Related products
See also AAP Roll Groove Equal Tee, Galvanised, AAP Roll Groove Concentric Reducer, Galvanised, AAP Roll Groove Rigid Coupling, Galvanised and AAP Roll Groove 90 Degree Elbow, Galvanised.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
3" x 3" x 4"
Model Number: GT8094G
-
4" x 3"
Model Number: GT9480G
-
6" x 4"
Model Number: GT9694G
