Hobson ASMSPS0BA0914 0BA BSF Allthread Rod, Mild Steel, Plain, 3ft

The Hobson BSF allthread rod is fully threaded along its length (BSF thread, mild steel with a plain finish), supplied in 3ft (914mm) lengths. This page lists 3 items: 0BA, 1/4" and 5/16".

The Hobson acronym list defines BSF as British Standard Fine and TPI as threads per inch. The table gives the threads per inch from the Hobson thread table, for the sizes it lists (manufacturer-stated).

The supplier description names AS 2451 (manufacturer-stated).

Each item is a single length.

The supplier lists the 0BA size under BSF. 0BA is a British Association size, so check the thread form you need against the table before ordering.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 3 sizes: 0BA, 1/4" and 5/16"
• BSF thread, fully threaded along its length
• Mild steel with a plain finish
• Supplied in 3ft (914mm) lengths
• Pack quantity shown for each item
• AS 2451 named by Hobson for these items (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. Sizes are nominal diameters in inches; compare the threads per inch in the table with your nut. The length shown is the full length of the rod; it can be cut to suit.

Related products

Related rods: Hobson BSF Allthread Rod, Plain, 3ft, 3/8" to 1-1/2", Hobson BSW Allthread Rod, Mild Steel, Plain, 3ft, 1/4" and 5/16" and Hobson BSW Left Hand Allthread Rod, Mild Steel, Plain, 3ft, 1/4" and 5/16".