Hobson DIN 975 Allthread Rod, M8

The Hobson allthread rod is fully threaded along its length (metric thread, hot dip galvanised finish), supplied in 1m lengths. There are 8 items: M8 to M64. Class 4.6 is low tensile carbon steel, and corresponds to imperial grade 2.

These rods are Class 4.6 UTS. UTS is a tensile strength abbreviation.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 8 sizes: M8 to M64
• Metric thread, fully threaded along its length
• Hot dip galvanised finish
• Supplied in 1m lengths
• Class 4.6 UTS strength level

Key specifications

Choosing the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. The length shown is the full length of the rod; it can be cut to suit. For a different strength level see Hobson Sampsonrod, Class 8.8, Plain, M6 to M52, 1m.

Related rods: Hobson Allthread Rod, Class 4.6 UTS, Plain, M6 to M56, 1m, Hobson Left Hand Allthread Rod, Class 4.6 UTS, Plain, M6 to M48, 1m and Hobson Allthread Rod, Class 4.6 UTS, Zinc Plated, M3 to M48, 1m.