Bremick Allthread Rod, M12

Bremick allthread rod is fully threaded along its length (metric thread, Grade 8.8, plain finish), supplied in 1m lengths. There are 7 items: M10 to M36, 1m long. Most items are single lengths; the table shows the one a pack.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or hanger
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 7 items: M10 to M36, 1m long
• Metric thread
• Grade 8.8, plain finish
• Full-length rod that can be cut to suit

Key specifications

Choosing the right option

Match the thread form and diameter of your nuts to the rod. The sizes are the nominal diameter in millimetres; the thread pitch is not for these items, so check it against your nut. The length shown is the full length of the rod; it can be cut to suit. In the usual class and grade chart, class 8.8 is a high tensile class.

See also: Grade 4.6 plain allthread rod, Grade 4.6 zinc allthread rod, metric hex nut, Grade 8 hot dip galvanised.