Alpha phillips double ended power bits, PH3 / 65

The Alpha Phillips double ended power bits are 1/4" hex power bits in PH1, PH2 and PH3. Both ends carry the same Phillips point size, so the bit has a second working end when the first end is worn. The PH2 bits run from 45mm to 400mm, the PH1 bits are 45mm and 75mm, and there is a single PH3 bit at 65mm. These bits have a 1/4" hex quick change shank, optimum full body hardness for longer service life and less wear, a compression forged tip to reduce breakage and magnetism that helps the bit grip the screw and prevent cam-out.

The PH2 x 200mm and PH2 x 400mm bits are sold as single bits. The PH2 bits in 45mm, 65mm, 75mm, 100mm and 150mm are handi packs of 10, and the PH2 bits in 45mm, 65mm, 100mm, 200mm and 300mm as single bits on a card.

Where this product is used

• Phillips screwdriving with a second working end on the same bit
• Reaching Phillips screws set deep in the work with the 150mm to 400mm bits
• Assembly, fit-out and maintenance work with Phillips screws

Features

• Phillips point at both ends in PH1, PH2 and PH3
• 45mm to 400mm overall length
• 7.2mm body diameter on every size
• 1/4" hex quick change shank
• Compression forged tip to reduce breakage
• Magnetism helps the bit grip the screw and prevent cam-out
• Packs of 10, except the 200mm and 400mm bits which are single

Key specifications

Choosing the right option

Choose the point size to match your screws (PH1, PH2 or PH3), then the length for the reach you need: 45mm to 100mm for general work, 150mm and longer where the screw is recessed. For the same PH2 bits in a hangable plastic pack see the Alpha Phillips double ended handi pack bits, and for one bit on a card see the carded Phillips double ended bits.

See also the: Alpha Phillips PH2 Double Ended Power Bits, Handi Pack of 10, 45mm to 150mm, Alpha Phillips PH2 Double Ended Power Bits, Carded, 45mm, 65mm and 100mm, Alpha Phillips Power Bits, PH0 to PH3, 50mm to 250mm, 1/4" Hex Shank, Pack of 10.