B-Safe Fall Arrest Harness BH01120, Size M, M (BH01120)

The B-Safe basic fall arrest harness, code BH01120, is a full body harness with front and rear fall arrest attachment points (manufacturer-stated). B-Safe's catalogue lists BH01120 in size M, and the AIMS record does not state a size. Its data sheet describes 44 mm polyester webbing, a forged rear D ring with a stand out feature, forged 2 bar 3 bar buckles, and front loops that park by velcro when not in use (manufacturer-stated).

B-Safe's data sheet lists fall arrest (a shock absorbing lanyard on the rear D ring, an inertia reel on the rear D ring or front loops, or a separate lanyard on the front loops), restraint, and recovery and rescue. B-Safe's catalogue says its harness range provides 140 kg capacity when used with B-Safe shock absorbing lanyards or inertia reels, and that every harness is individually proof loaded to 7.5 kN (750 kg) before final inspection (manufacturer-stated). B-Safe's data sheet states the harness is AS/NZS 1891.1:2007 certified, and B-Safe's catalogue says its harnesses are made to meet AS/NZS 1891.1 and should be used, cared for and maintained to AS/NZS 1891.4 (manufacturer-stated). Ask AIMS for the certificate that applies to the harness supplied.

B-Safe's technical guide says to inspect fall protection equipment before each use, to check the date of manufacture and the remove from service date on the label, and to take any equipment that has been used to arrest a fall out of use and return it to the supplier for inspection and certification, or destroy it (manufacturer-stated).

Fall protection equipment must be selected, installed, used, inspected and maintained by trained people in line with the manufacturer's instructions and the relevant Australian Standards. Ask AIMS for the instructions and test certificates before you order, and never use it for any purpose other than the one it was made for.

Where this product is used

• Fall arrest using a shock absorbing lanyard on the rear D ring, an inertia reel on the rear D ring or front loops, or a separate lanyard on the front loops (manufacturer-stated)
• Restraint, using a shock absorbing lanyard on the rear D ring or both front loops connected together (manufacturer-stated)
• Recovery and rescue using both front loops connected together (manufacturer-stated)

Features

• Front and rear fall arrest attachment points, with a large stand out rear D ring and front loops (manufacturer-stated)
• Front loops park by velcro when not in use (manufacturer-stated)
• Forged rear D ring and forged buckles (manufacturer-stated)
• Weight 1.2 kg (manufacturer-stated)
• Fully adjustable leg, shoulder and chest straps (manufacturer-stated)
• Sub pelvic strap so the harness does not peel off in a backwards, crouched fall position (manufacturer-stated)
• Breathable rear mesh panel to help the harness hold its shape when donning (manufacturer-stated)
• All metal components batch numbered for traceability, and 100% visually inspected and proof loaded (manufacturer-stated)

Key specifications

Selecting the right option

B-Safe's sizing guide gives waist measurements of 660 to 900 mm for small, 750 to 1050 mm for medium and 750 to 1150 mm for large and extra large, and says the guide does not replace confirming a suitable fit before you buy (manufacturer-stated). This listing is the catalogue size M. For other sizes see the all purpose fall arrest harness page. Fit the harness using the instructions on its label before each use.

Related products

Other B-Safe harnesses and fall protection: the harness with waist belt and side D rings, the harness with integrated lanyard, the 2 m shock absorbing lanyard and the Arresto inertia reel. A harness is one part of a system, so check every item before you order.