Beaver Chain Split Link, Hot Dipped Galvanised, 6 mm (420306)

Beaver chain split links in a hot dipped galvanised finish are used to join or repair lengths of chain. Beaver states that they can be used to join or repair lengths of chain quickly and economically, and that they can be hammered down or tack welded to close the link in place.

The links are supplied in 6, 8 and 10 mm sizes, in packs of 800, 400 and 200 respectively. Beaver also lists the same sizes (plus 3.5, 5 and 13 mm) in an electro galvanised finish, which is not part of this range.

Beaver does not publish a working load limit (WLL), a rating or a lifting use for its chain split links. Do not use them in lifting assemblies, or where a rated component is required, unless Beaver confirms a rating for your use in writing.

Where this product is used

• Joining lengths of chain (manufacturer-stated)
• Repairing lengths of chain (manufacturer-stated)

Features

• Hot dipped galvanised finish (manufacturer-stated)
• Joins or repairs chain quickly and economically (manufacturer-stated)
• Can be hammered down or tack welded to close the link in place (manufacturer-stated)
• Sizes 6, 8 and 10 mm
• No WLL or rating published by Beaver

Key specifications

Codes, sizes, pack quantities and weights are from Beaver's Materials Handling Technical Manual (Vol. 4) and Beaver's website. Weights are approximate.

Selecting the right option

Choose the size that suits the chain you are joining, and confirm it with Beaver if you are unsure. Beaver does not publish a working load limit (WLL), a rating or a lifting use for its chain split links. Do not use them in lifting assemblies, or where a rated component is required, unless Beaver confirms a rating for your use in writing.

Related products

Other Beaver chain: galvanised proof coil chain, galvanised hardware chain. These are not rated lifting chains.