Beaver Galvanised Dee Shackle 8 x 10 mm, 0.75 t WLL, Pail of 50 (241308P)

Beaver hot-dip galvanised screw pin dee shackles supplied in pails, in WLLs from 750 kg (0.75 t) to 8,500 kg (8.5 t). Each pail holds a set number of shackles of one size (see the table).

Beaver states that dimensions are nominal and that actual dimensions fall within the tolerances of AS 2741. Beaver lists dee shackles up to 8.5 t as available in pails only.

Where this product is used

• Beaver states that dee shackles are mainly used on single leg (one-leg) lifting systems.
• Beaver states that screw pin shackles are used mainly in non-permanent applications.
• Workshop and site stock of rated dee shackles in the commonly used sizes.

Features

• Hot-dip galvanised screw pin dee shackle with a WLL of 750 kg to 8,500 kg
• Supplied in a pail of 4 to 50 shackles, depending on size
• Dimensions within the tolerances of AS 2741 (manufacturer-stated)

Key specifications

Dimensions and weights are from Beaver's Materials Handling Technical Manual (Vol. 4) and are nominal.

Selecting the right option

Choose the shackle by the WLL marked on it. Inspect the shackle before each use. Check that the markings are legible, the pin and body threads are undamaged, and the body and pin are not distorted, worn, nicked, gouged, cracked or corroded. Do not heat treat, weld, bend or reshape a shackle, and do not replace the pin with a screw or bolt, as this affects the WLL. A safety bolt type shackle must always be used with its split cotter pin. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards. If you are unsure what suits your lift, contact AIMS or a qualified rigger before ordering.

Related products

For a single shackle see the Beaver yellow pin Grade S screw pin dee shackles and the Beaver Grade S safety pin dee shackles.