Beaver Aluminium Wire Rope Ferrule, Size 1.5 mm (317101A)

Beaver aluminium wire rope ferrules are sleeves made by Beaver and certified to EN 13411, according to Beaver (manufacturer-stated). Beaver describes them as the standard ferrule for machine swaging eyes in galvanised or black wire rope. A ferrule (swaged sleeve) is a sleeve pressed onto wire rope with a swaging tool to form a termination such as an eye. This listing carries 23 sizes from 1.5 mm to 28 mm. Beaver's range also lists 6.5, 30, 32, 34, 36, 38, 40, 42, 44, 46, 52, 56 and 78 mm.

Beaver lists each size with its DIN code, dimensions and a pack of 100, and gives no swaging instructions or breaking load for the aluminium ferrules. Match the ferrule size to the rope diameter and the swaging tool.

Where this product is used

• Machine swaged eyes in galvanised or black wire rope, which Beaver describes as the purpose of its standard aluminium ferrule (manufacturer-stated)

Features

• Aluminium ferrules certified to EN 13411, according to Beaver (manufacturer-stated)
• Beaver describes it as the standard ferrule for machine swaging eyes in galvanised or black wire rope (manufacturer-stated)
• 23 sizes in this listing, 1.5 mm to 28 mm (manufacturer-stated)
• Dimensions a, b, c and L listed for each size, with a Beaver pack of 100 (manufacturer-stated)
• No breaking load or termination efficiency published by Beaver

Terminations and lifting

A ferrule termination is only as sound as the combination of rope, ferrule, press tool and procedure used to make it. Beaver publishes no breaking load, termination efficiency, swaging instructions or press settings for these ferrules. If the assembly will be used for lifting, have it made and tested by a qualified rigger or assembler. Beaver also says it can supply manufactured slings made to order (manufacturer-stated).

Key specifications

Codes, sizes, dimensions and pack quantities are from Beaver's Materials Handling Technical Manual (Vol. 4) and the Beaver website. Beaver does not define the dimension letters a, b, c and L, and lists the size under the heading "DIN Code". Beaver sells the ferrules singly (unit of measure: each) and lists the pack quantity shown.

Selecting the right option

Ferrules are sized to the nominal diameter of the wire rope. Confirm the size for your rope and swaging tool before ordering, and use the dimensions in the table (Beaver does not define the letters a, b, c and L) to check the fit.

Related products

Related wire rope fittings: galvanised wire rope grips, commercial electro galvanised wire rope grips (pail), G316 stainless steel wire rope grips, hot dipped galvanised wire rope thimbles, G316 stainless steel wire rope thimbles, copper wire rope ferrules, nickel plated copper wire rope ferrules. Beaver wire rope: G2070 7 x 7 wire rope, G2070 7 x 19 wire rope, G1770 6 x 36 wire rope and G1570 6 x 19 fibre core wire rope. Commercial galvanised thimbles for non-lifting use: Beaver commercial galvanised wire rope thimbles. Check each fitting is sized for the rope diameter and suits the job before you order.