Bondhus BD13190 10 Piece Ball End T-Handle Set 3/32" to 3/8"

This Bondhus set has 10 imperial T-handles, 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" and 3/8", for hex socket screws and you get a stand to keep the set in order. Each T-handle has a solid steel handle with the blade welded to it. The handle is shaped to fit the hand, and the solid mass gives a flywheel effect, so you can run screws in and out quickly. The sizes are printed on the handles, so you can pick the right one fast (manufacturer-stated).

The tips are mostly ball end. A ball end goes into the screw at up to a 25 degree angle, so you can turn a screw without lining the handle up straight. To prevent breakage, the small blades (3/32", 7/64", 1/8" and 9/64") are straight hex, not ball end. The set is graduated, so the handles get longer as the size goes up. Going by the maker size table, the 3/32" is 154mm overall and the 3/8" is 300mm. The finish is ProGuard, which Bondhus says gives better corrosion resistance and grip. This is the 10 piece set with a stand. The version without a stand has the same sizes. The 6 piece set only starts at 5/32" (manufacturer-stated).

Where this product is used

• Hex socket screws that need a fast, comfortable handle with plenty of reach (manufacturer-stated)
• Machine assembly and maintenance for fitters, mechanics and panel assemblers (manufacturer-stated)
• A tidy workshop set that keeps every size to hand (manufacturer-stated)

Features

• 10 imperial T-handles in 3/32" to 3/8" (manufacturer-stated)
• Solid steel handles with the blade welded to the handle (manufacturer-stated)
• Ergonomic handle with a smooth, non-porous coating that extends along the blade (manufacturer-stated)
• Flywheel effect from the solid handle saves time (manufacturer-stated)
• Sizes printed on the handles for quick selection (manufacturer-stated)
• Graduated lengths: 154mm overall in 3/32" up to 300mm in 3/8" (manufacturer-stated)
• Ball end tips insert into the screw at a 25 degree angle, with straight hex blades in the smallest sizes (manufacturer-stated)
• Comes with a stand (manufacturer-stated)
• ProGuard finish, which Bondhus says gives better corrosion resistance and grip (manufacturer-stated)
• Bondhus says its steel is up to 20% stronger, with more torque and higher wear resistance than standard steel (manufacturer-stated).

Key specifications

Specification values are manufacturer-stated (bondhus.com Ball End T-handle pages and Sutton Tools catalogue, part number BD13190).

Supplied with

• 10 T-handles: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" and 3/8"
• Stand