Bondhus 7/32" Hex End T-Handle BD13311, 154mm

The Bondhus imperial hex end T-handle is a hex key with a handle across the top, made for maintenance fitters, machine assemblers and mechanics. This range has 10 imperial sizes from 3/32" to 3/8" in graduated lengths. The shaft gets longer as the size gets bigger, from 105mm overall at 3/32" to 211mm at 3/8", and the handle grows with the size from 76mm to 127mm. Each size is packed in 2s.

A T-handle is a hex key with a handle across the top, so you grip it in your whole hand and turn it with your palm. Bondhus makes the handles from Protanium High Torque Steel in the U.S.A. And finishes them with ProGuard, which gives strong corrosion protection. The handle is solid steel with a welded handle and blade joint and a smooth, non-porous coating that runs along the blade. Yellow handles identify inch sizes. If you need more reach, Bondhus also makes these sizes in 6" (152mm) and 9" (229mm) lengths, and the ball end T-handles reach screws from an angle.

Where this product is used

• Machine maintenance and repair on imperial hex socket screws
• Assembly and setup work where a loose hex key is hard on the hand
• Workshop and toolbox use, one comfortable handle for each size

Features

• 10 imperial hex sizes from 3/32" to 3/8", sold as single sizes
• Graduated length, from 105mm overall (3/32") to 211mm overall (3/8")
• Handle length steps up with the size: 76mm, 102mm or 127mm
• Solid steel handle with a welded handle and blade connection
• Smooth, non-porous handle coating that extends along the blade
• Chamfered hex tips fit snugly and leave no burrs
• ProGuard finish for corrosion protection
• Protanium High Torque Steel, made in the USA
• Yellow handles identify inch sizes

Key specifications

Choosing the right option