Skip to content

Bordo Cobalt TiAlN Coated White Band Jobber Drill Bit: 4

SKU: A0193945 | Model: 2058-4.00

This is the 4mm diameter option of the Bordo Cobalt TiAlN Coated White Band Jobber Drill Bit. Key details for this option: flute type 33° Helix, flute length 43mm.

Bordo Cobalt TiAlN Coated White Band Jobber Drill Bit

Bordo Metric White Band HSS-Co TiAlN Coated Twist Drills for Cast Iron.

DIN338.

118° / 70° DX point with two helical flutes with 33 degrees of helix angle.

A highly abrasive material with damping and thermal conductivity, high strength and resistance to wear. Cast Iron is used extensively for mass-produced components.

The White Band Series is designed for this specific purpose. TiAlN coating increases tool surface hardness to 87Rc.

For machining materials with Hardness < 300 HB: Tensile Strength <10900 N/mm².

About DX Point

The double angled DX Point (118°/70°) minimises wear on the outer corners of the drill point in highly abrasive materials such as Cast Iron and Reinforced Plastics.

The point is web thinned to enable easier penetration.

About Drill Bit Surface Treatment

Violet / Grey TiAlN (Titanium Aluminium Nitride - TiAlN) A violet/grey finish with a higher hardness than both TiN and TiCN coating utilises aluminium in the coating which imparts greater oxidation stability.

This stability is a result of a very thin film (of Aluminium Oxide) which is formed on the surface of the TiAlN.

This film is self-repairing which leads to increased tool service life.This high-performance coating is able to withstand much higher temperatures which allows increased speeds and feeds and semi-dry machining operations.

TiAlN coating is especially useful when machining cast iron and tough steels.

Quote Cart