Bordo 16 x 1.5mm MF Chrome Alloy Conduit Hand Tap
Available
The Bordo MF Chrome Alloy Conduit Hand Tap Set is part of Bordo's Australian range of hand taps, built for reliable performance in trade and industrial applications.
Key Specifications
| Drill Diameter (mm) | 14.5 |
|---|---|
| Diameter (mm) | 16 |
| Pitch (mm) | 1.5 |
| Surface Finish | Bright |
| Flute Type | Straight |
| Tap Lead | Set |
| Overall Length (OL) mm | 102 |
Product Features
- Chrome Alloy Conduit (Metric Fine) Hand Tap Set
- Metric Fine angle of thread is 60 degrees
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Bordo MF Chrome Alloy Conduit Hand Tap Set: 16
SKU: A0195313 | Model: 4223-16.00TS
This is the 16mm diameter option of the Bordo MF Chrome Alloy Conduit Hand Tap Set. Key details for this option: flute type Straight, drill diameter 14.5mm, pitch 1.5mm, surface finish Bright.
Bordo MF Chrome Alloy Conduit Hand Tap Set
Chrome Alloy Conduit (Metric Fine) Hand Tap Set.
Used as thread chasers to clean an existing thread.
They can also be used to create a new female thread in non-ferrous metals and plastics.
Chrome alloy taps are not suitable for creating precision, safety or critical threads.
Metric Fine angle of thread is 60 degrees.
The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres).
Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.

