Skip to content

Bordo NPT Bottoming Chrome Alloy Hand Tap - 4252: 1/8

SKU: A0201008 | Model: 4252-1/8B

Diameter (inch) 1/8. Bordo NPT Bottoming Chrome Alloy Hand Tap - 4252

Chrome Alloy NPT Bottoming Hand Tap.

Used as thread chasers to clean an existing thread.

They can also be used to create a new female thread in non-ferrous metals and plastics.

Chrome alloy taps are not suitable for creating precision, safety or critical threads.

National Pipe Tapered is a US standard for tapered threads used to join pipes and fittings.

ANSI/ASME standard B1.20.1 covers threads of 60° form with flat crests and roots.

The taper on NPT threads allows them to form a seal when torqued as the flanks of the threads compress against each other.

However a clearance remains between the crests and roots of the threads, resulting in a leakage around this spiral.

This means that NPT fittings must be made leak free with the aid of thread seal tape or a thread sealant compound.

For each 12" increase in distance from the end, the diameter increases by 3/4".

Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.

Quote Cart