Bossweld Binzel Style Yellow Steel Liner 1.2 to 1.6 mm x 3 m | 92.04.Y3

Bossweld Binzel Style Yellow Steel Liner 1.2 to 1.6 mm, 3 to 5 m fit Binzel style MIG torches. The yellow colour marks the 1.2 to 1.6 mm wire range, so the size is easy to identify. It is supplied in 3 m, 4 m and 5 m lengths for mild steel and stainless steel wire.

The liner guides the welding wire from the drive rollers to the contact tip. A clean liner of the right bore feeds wire smoothly, while a worn, dirty or wrongly sized liner causes erratic feeding, bird-nesting and burn-back. Steel liners suit steel and stainless steel wire.

Where this product is used

• MIG welding with mild steel and stainless steel wire
• Replacing a worn, kinked or dirty liner that is causing feed problems
• Fitting a liner of a different bore or length to suit a change of wire

Features

• Steel liner for Binzel style MIG torches
• Wire sizes: 1.2 to 1.6 mm
• Length: 3 m and 4 m and 5 m
• Colour-coded: yellow

Key specifications

Selecting the right option

Pick the liner to match your wire: the bore range has to include your wire diameter, and the material has to suit the wire (steel for steel and stainless, Teflon for aluminium and soft wires). Check the length against your torch cable, and cut the liner square and deburr the end when you fit it. Replace the liner whenever feeding becomes erratic, and change it along with the contact tip if you have been burning back. If you are unsure which liner your torch takes, contact AIMS with the torch model before ordering.

Related products

Matching parts for the same torch style: Bossweld Binzel 501 Style Contact Tip, Bossweld Conical Nozzle Binzel Style BZ501 Adjustable 16mm STD Packet of 2, Bossweld Gas Diffuser Binzel Style BZ501 White Packet of 2 and Bossweld Binzel Style BZ501 Tip Holder M8 Short (28mm) (Pack of 2).