Bossweld 3.0 mm Gouging Tip for A101 Torch (Pack of 5)
The price shown is for the pack.
Available
Bossweld 3.0mm Gouging Tip for A101 Torch suits A101 torches. It is a gouging tip with a 3.0mm bore, part 94.PD0101-30. The larger bore is made for gouging, where you remove metal rather than cut through it. It is supplied as a pack of 5.
The tip, also called the nozzle, holds the small orifice that squeezes the plasma arc into a tight, hot jet. The bore size is matched to the cutting current. A worn tip gives a rough or angled cut, a wider kerf or an oval hole, so replace it before the orifice is badly worn, normally together with a new electrode.
Where this product is used
- Plasma gouging with an A101 torch
- Removing welds, defects or backing metal ready for repair
- Keeping spare gouging parts at the machine
Features
- Plasma cutting tip for A101 torches
- Tip size: 3.0mm
- Use: Gouging
- Supplied as a pack of 5
Key specifications
| Specification | Detail |
|---|---|
| Brand | Bossweld |
| Type | Plasma cutting tip |
| Fits | A101 torches |
| Tip size | 3.0mm |
| Use | Gouging |
| Pack quantity | 5 |
| Part number | 94.PD0101-30 |
Choosing the right option
Match the tip to your torch by part number and pick the bore size to suit the cutting current you run: a smaller bore suits lower current and thinner plate, and a larger bore suits higher current. Extended tips go with extended electrodes, so check what is fitted to your torch now. Check the part number against the parts list for your torch before ordering.
Matching parts for the same torch family: Bossweld Electrode for A101/A141 Torches (Pack of 5), Bossweld Gouging/Contact Cutting Nozzle HD for A101 Torch, Bossweld Swirl Ring for Ergocut A101 Torch.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Bossweld 3.0 mm Gouging Tip for A101 Torch (Pack of 5)
SKU: A0149456 | Model: 94.PD0101-30
Bossweld 94.PD0101-30: 3.0mm Gouging Tip for A101 Torch. Suits: A101 torches. Tip Size: 3.0mm.

