Brady J20-18-2595 B-2595 Inkjet Vinyl Label, White, 76.2 x 25.4 mm, 1000 per Roll

Brady B-2595 is a white inkjet-receptive vinyl for the BradyJet J2000 colour label printer. This listing has seven items: four pre-cut label rolls from 76.2 x 25.4 mm to 104.9 x 154.94 mm (200 to 1000 labels a roll) and three continuous tape rolls 28.58, 57.15 and 101.6 mm wide and 30.48 m (100 ft) long (manufacturer-stated). Brady lists the three largest pre-cut sizes (J20-260-2595, J20-261-2595 and J20-262-2595) as GHS label sizes (manufacturer-stated).

B-2595 is a matte vinyl 0.13 mm (0.0053 in) thick with a permanent acrylic adhesive and a topcoat that Brady says protects the print from smudging. Brady quotes a service temperature of -40 to 60 °C, a minimum application temperature of -18 °C, lists it as abrasion resistant, and says it was tested against exposure to liquids, alcohol, chemicals and indoor fluorescent and UV lighting (manufacturer-stated). Brady does not recommend it for outdoor use (manufacturer-stated). Printing needs the J20-CMY ink cartridge, and Brady lists RoHS compliance to 2011/65/EU with exemptions (manufacturer-stated). Figures are Brady published values (manufacturer-stated).

The ERP and the old product title called all seven items pre-cut labels, but Brady lists the three J20C-xxxx-2595 items as continuous vinyl tape. Two numbers identify each product. The product code is Brady's alphanumeric part number, and it is the code to search for or quote. The Brady ordering number is the six-digit number Brady uses for the same product. Both are in the table below, and the Product Code shown for each option on this page is the part number.

Where this product is used

• Pipe, valve and equipment identification (manufacturer-stated).
• Safety, hazard communication and lockout labelling (manufacturer-stated).
• Electrical labelling, and facility, warehouse and lean or 5S labelling (manufacturer-stated).
• GHS chemical container labels in the three larger pre-cut sizes (manufacturer-stated).

Features

• Inkjet-receptive vinyl with permanent acrylic adhesive (manufacturer-stated)
• Topcoat protects print from smudging (manufacturer-stated)
• Service temperature -40 to 60 °C (manufacturer-stated)
• Abrasion resistant; tested against liquids, alcohol and chemicals (manufacturer-stated)
• Indoor use; outdoor not recommended (manufacturer-stated)
• Four pre-cut sizes and three continuous widths, each with its own product code

Common specifications

Key specifications

Selecting the right option

Choose pre-cut labels for repeat sizes and continuous tape when the length changes. Sizes for pre-cut labels are listed width first, then height. These labels print on the BradyJet J2000 only. For labels that handle autoclave and liquid nitrogen see the B-7425J inkjet laboratory labels for the J2000, and for tags see the B-2551 polyester tags for the J2000.

Related products

Related Brady products: B-7425J inkjet laboratory labels for the J2000 and B-2551 polyester tags for the J2000.