Brady B85-105X155-7569-CLP1 B-7569 GHS/CLP Label, 105 x 154.99 mm, Red on white

Brady B-7569 GHS/CLP labels are die-cut vinyl labels with a red GHS/CLP diamond area pre-printed, on a roll for the Brady BBP85 printer. This listing has 12 rolls: six layouts (L1, L2, L3A, L3B, L4A and L4B) in two sizes, 105 x 154.99 mm (90 labels per roll) and 155.02 x 209.98 mm (70 labels per roll), given as height x width (manufacturer-stated).

Brady describes B-7569 as a gloss vinyl with a permanent acrylic adhesive that is abrasion, chemical, oil and water resistant, with a service temperature from -20 to 75 °C, a minimum application temperature of 10 °C and an average outdoor durability of up to 3 years (manufacturer-stated). Brady lists the pre-printed area only as 'Red GHS/CLP' with 1, 2, 3A, 3B, 4A or 4B diamonds and calls the product printer supply, so the pictograms, signal words and hazard text are not listed by Brady. Check a layout against the requirements for your chemical before ordering. A ribbon is required: Brady names 13511 for the smaller size and 13510 for the larger, sold separately.

Brady's pages list these parts as not containing an SVHC under REACH (manufacturer-stated). The Product Code is Brady's part number for each roll and the Brady ordering number is shown beside it in the table below. Brady lists the BBP85 only. Brady Australia lists BS 5609:1986 Section 2 and section 3 for these labels and does not name a GHS, CLP or Australian standard (manufacturer-stated).

Where this product is used

• Hazard communication labelling on chemical containers and equipment (manufacturer-stated).
• Component and equipment labelling, facility identification and inventory and inspection labelling (manufacturer-stated).

Features

• Die-cut vinyl labels with a red GHS/CLP diamond area pre-printed (manufacturer-stated)
• Permanent acrylic adhesive; abrasion, chemical, oil and water resistant (manufacturer-stated)
• Service temperature -20 to 75 °C; average outdoor durability up to 3 years (manufacturer-stated)
• Two sizes, 90 or 70 labels per roll (manufacturer-stated)
• For the BBP85; ribbon sold separately (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Pick the size your BBP85 set-up takes, then the layout. Brady lists each layout as a number of red GHS/CLP diamonds only, so confirm the layout suits your chemical before ordering. For B30 printers see the B-7569 pre-printed GHS and CLP chemical labels. Brady's product pages are written for the US market, so standards or approvals they list may be North American. Ask us if an approval matters for your job.

Related products

Related Brady products: B-7569 pre-printed GHS and CLP chemical labels, BBP85 and PowerMark single colour ribbons, BBP85 and PowerMark B-595 vinyl labels and BBP85 B-569 low-halide polyester labels.