Brady DMC-1.3/3-15 Durasleeve Wire Marking Carriers, Clear

Brady Durasleeve wire marking carriers are clear PVC carriers, 15mm wide, that hold a printed label on a wire or cable. Each carrier is a transparent tube with a label pocket: you insert a printed label, slide the carrier onto the wire and it stays in place. It is non-adhesive, so it installs and removes easily.

The range has four carriers for wire from 1.3 to 16mm diameter, in pack sizes of 1000, 1000, 500, 500. These parts do not contain an SVHC under REACH.

Where this product is used

• Electrical labelling
• Wire and cable labelling with a removable carrier

Features

• Clear PVC makes the printed label easy to read
• Slides onto the wire and stays in place
• Non-adhesive for easy installation and removal
• Label pocket for inserting a printed label
• Four wire diameter ranges from 1.3 to 16mm

Key specifications

Choosing the right option

Choose the carrier by the diameter of the wire or cable: 1.3 to 3mm, 2.5 to 5mm, 4 to 10mm or 8 to 16mm. If your wire sits in an overlap between two sizes, pick the one that fits snugly. For heat-shrink wire sleeves see the PermaSleeve B-342 sleeves for M4 and M5 printers, PermaSleeve B-342 single-sided sleeves for B33 printers and PermaSleeve B-342 double-sided sleeves for B33 printers.

Related Brady products: Durasleeve 30mm wire marking carriers, PermaSleeve B-342 sleeves for M4 and M5 printers, PermaSleeve B-342 single-sided sleeves for B33 printers and PermaSleeve B-342 double-sided sleeves for B33 printers.