Brady B33-143-492 B-492 FreezerBondz Ultra-Thin Cryogenic Label, 9.53 mm diameter

Brady B-492 FreezerBondz is an ultra-thin gloss polyester label for small laboratory vials and tubes that go into liquid nitrogen or freezers. This listing has nine die-cut sizes for B33 series printers: a 9.53 mm round label, rectangles from 22.86 x 25.4 mm to 48.26 x 25.4 mm, and three vial-top sets that pair a rectangle with a round top label, on cartridges of 1500 to 2500 labels (manufacturer-stated).

B-492 is 0.08 mm (0.0032 in) thick with an aggressive permanent acrylic adhesive. Brady lists it as chemical and smear resistant, suited to cold and high surface energy surfaces, with a working range of -196 to 100 °C in its description (its specification table shows a higher upper figure, so this page uses the lower range), and does not recommend outdoor use (manufacturer-stated). Brady gives a vial or tube size for each label, from 0.5 mL to 8 mL, and B30-R6400 as the ribbon (manufacturer-stated). Figures are Brady published values (manufacturer-stated).

Two numbers identify each product. The product code is Brady's alphanumeric part number, and it is the code to search for or quote. The Brady ordering number is the six-digit number Brady uses for the same product. Both are in the table below, and the Product Code shown for each option on this page is the part number.

Where this product is used

• Cryogenic and freezer laboratory sample labelling (manufacturer-stated).
• General identification and laboratory labelling (manufacturer-stated).
• Vial and tube labelling, including vial-top sets that pair a side label with a lid label.

Features

• Ultra-thin cryogenic polyester in a gloss finish (manufacturer-stated)
• Aggressive permanent acrylic adhesive (manufacturer-stated)
• Working range -196 to 100 °C (manufacturer-stated)
• Chemical and smear resistant (manufacturer-stated)
• Sizes matched to 0.5 mL to 8 mL vials and tubes (manufacturer-stated)
• Nine sizes, each with its own product code

Common specifications

Key specifications

Selecting the right option

Match the label to the vial or tube using the size column, which shows the vial or tube volume Brady lists for each label. Vial-top sets give a side label and a round top label on the same cartridge. Sizes are listed width first, then height. The ribbon is sold separately: see the B30 series printer ribbons. For larger cryogenic labels see the B-490 FreezerBondz cryogenic labels.

Related products

Related Brady products: B-490 FreezerBondz cryogenic labels, B-481 StainerBondz microscope slide labels, B-425A polypropylene labels and B30 series printer ribbons.