Brady A62-7-499 Wraptor B-499 Nylon Wrap Label, White, 12.7 x 19.05 mm, 600 per Roll

Brady B-499 is a matte nylon cloth wrap label for the Wraptor A6200 printer applicator, which prints and applies wire and cable labels. This listing has four sizes on rolls of 450 or 600 labels: 12.7 x 19.05, 12.7 x 25.4, 25.4 x 19.05 and 25.4 x 25.4 mm (manufacturer-stated).

B-499 is a 0.17 mm (0.0065 in) nylon cloth with a permanent acrylic adhesive. Brady quotes a service temperature of -40 to 90 °C, says the cloth is pliable enough to conform to tightly curved surfaces such as vials, wire and cable, and recommends indoor use (manufacturer-stated). The two 19.05 mm tall labels suit wire from 22 to 6 AWG (1.52 to 6.1 mm diameter) and the two 25.4 mm tall labels suit 16 to 6 AWG (3.3 to 6.35 mm diameter) (manufacturer-stated). Brady lists the material as UL approved and CSA accepted without a standard number, and A62-R4300 as the ribbon (manufacturer-stated). Brady's product pages are written for the US market, and standards or approvals they list are North American, so ask us if an approval matters for your job. Figures are Brady published values (manufacturer-stated).

Two numbers identify each product. The product code is Brady's alphanumeric part number, and it is the code to search for or quote. The Brady ordering number is the six-digit number Brady uses for the same product. Both are in the table below, and the Product Code shown for each option on this page is the part number.

Where this product is used

• Wire and cable labelling (manufacturer-stated).
• Electrical labelling and component and equipment labelling (manufacturer-stated).
• General identification and warehouse marking (manufacturer-stated).

Features

• Matte nylon cloth with permanent acrylic adhesive (manufacturer-stated)
• Wrap-around label that conforms to curved surfaces (manufacturer-stated)
• Service temperature -40 to 90 °C (manufacturer-stated)
• Wire from 22 to 6 AWG across the four sizes (manufacturer-stated)
• UL approved, CSA accepted (no standard number given) (manufacturer-stated)
• Four sizes, each with its own product code

Common specifications

Key specifications

Selecting the right option

Choose the size by the wire: the 19.05 mm tall labels for 22 to 6 AWG and the 25.4 mm tall labels for 16 to 6 AWG, then pick the width for the amount of text. Sizes are listed width first, then height. These labels print on the Wraptor A6200 only. For self-laminating wraps see the Wraptor B-427 self-laminating vinyl wraps and the Wraptor B-417 high adhesion self-laminating wraps, and for a B33 printer see the B-499 nylon labels for B33 printers.

Related products

Related Brady products: Wraptor B-427 self-laminating vinyl wraps, Wraptor B-417 high adhesion self-laminating wraps and B-499 nylon labels for B33 printers.