Bramley Chassis hole punches, 48mm
Available
Bramley chassis hole punches cut neat holes in sheet metal from 1/2" (12.5mm) to 2" (51mm) across 15 sizes. They use a 3 point punch design for easier cutting and an upgraded tool steel specification for increased life and performance, and cut stainless steel more easily than the previous design.
To use one: drill a hole 1/32" (0.8mm) larger than the drive screw, insert the screw through the die, place the screw through the hole in the metal and screw on the punch, then turn the drive screw with a spanner or wrench until the metal is cut.
Where this product is used
- Cutting neat round holes in sheet metal
- Cutting round holes in sheet metal
Features
- Cuts neat holes in sheet metal, 1/2" (12.5mm) to 2" (51mm)
- 3 point punch design for easier cutting
- Upgraded tool steel specification for increased life and performance
- Cuts stainless steel more easily than the previous design
- Simple to use with a drive screw and a spanner or wrench
- 15 sizes, each with its own drive screw thread: M8, M10, M12 or M20
Key specifications
| Specification | Detail |
|---|---|
| Brand | Bramley |
| Product type | Chassis Punch |
| Mild steel | 2mm, 2.5mm |
| Stainless steel | 1.6mm, 2mm |
| Drive screw thread | M8, M10, M12, M20 |
Choosing the right option
Drill a pilot hole 1/32" (0.8mm) larger than the drive screw thread for that size. For six popular sizes in one set see the Bramley CPSET six piece set.
See also: Bramley CPSET chassis hole punch set.
| Option | Part number | SKU |
|---|---|---|
| 12.5 | A0128748 | |
| 16 | A0128749 | |
| 19 | A0128750 | |
| 20 | A0128751 | |
| 22 | A0128752 | |
| 25.5 | A0128753 | |
| 28.5 | A0128754 | |
| 30 | A0128755 | |
| 32 | A0128756 | |
| 35 | A0128757 | |
| 38 | A0128758 | |
| 41.5 | A0128759 | |
| 44.5 | A0128760 | |
| 48 | A0128761 | |
| 51 | A0128762 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Bramley Chassis Hole Punch: 48
SKU: A0128761 | Model: CP48
Size (mm) 48. Bramley Chassis Hole Punch Simple to use: Drill a hole 1/32” (0.8mm) larger than drive screw Insert screw through die Place screw through hole in metal & screw on punch Turn drive screw with spanner or wrench until metal is cut.