Challenger manual chain block, 2000kg load capacity, 3m

There are 8 models, with a lift of 3m or 6m.

It has brake lockout protection, a high-strength end stop with a secondary end anchor, encapsulated needle and side plate bearings, a UV resistant coating and aluminium-free construction. The 3m lift models have a 2m hand chain drop and the 6m lift models a 5m drop. The 3 tonne and 5 tonne models run on 2 chain falls and the smaller sizes on 1.

Where this product is used

• Lifting engines, machinery and fabricated parts in workshops and maintenance bays
• Overhead lifts from a beam, gantry or trolley where no power is needed
• Positioning loads for fitting, assembly and repair work

Features

• Rated capacity from 0.5 tonne to 5 tonne
• Lift of 3m or 6m, with a 2m or 5m hand chain drop
• Grade 80 load chain, CNC machined before heat treatment
• Brake lockout protection
• High-strength end stop with a secondary end anchor
• Encapsulated needle and side plate bearings
• UV resistant coating and aluminium-free construction

Key specifications

Choosing the right option

Choose the capacity on your heaviest lift and keep the load inside the rated capacity on the table, then choose the lift for the height you need: 3m or 6m. The hand chain drop is longer on the 6m models (5m against 2m), so check you have the room to pull it. Lifting equipment must be used within its rated capacity, inspected before each use, and selected and used in line with your site lifting procedure and the applicable standards and regulations. Do not use it to lift or lower people. If you are unsure what suits your lift, speak to a qualified rigger before ordering.

See also: Pacific chain blocks, Challenger lever blocks Gen II, Challenger push beam trolleys.