Finer Power circlip External, shaft diameter (s) mm 180
Available
These are external circlips for shafts, 48 sizes from 61 to 200mm shaft diameter, sold individually. An external circlip snaps into a groove machined in the shaft and holds a bearing, gear or other component against axial movement.
Where this product is used
- Retaining bearings on shafts and in housings
- Locating gears, pulleys and sleeves on a shaft
- Holding pins, rollers and spacers in place
- Maintenance and repair where a circlip is lost or damaged
Features
- External circlips for shafts
- 48 sizes, 61 to 200mm shaft diameter
- Sold individually
- Groove diameter, groove width and ring thickness for every size
- Dimensions match the DIN 471 normal type circlip table
Key specifications
| Specification | Detail |
|---|---|
| Type | External circlip |
| Fits | Shaft diameter 61 to 200mm |
| Sizes | 48 models |
| Ring thickness | 2 to 4mm |
| Groove diameter (G) | 58 to 195mm |
| Supplied | Individually |
Sizes available
| Part number | Shaft dia. (mm) | Groove dia. G (mm) | Groove width W (mm) | Ring thickness t (mm) | Edge distance n min (mm) | Free dia. d (mm) | Lug hole h min (mm) |
|---|---|---|---|---|---|---|---|
| 1400-61 | 61 | 58 | 2.15 | 2 | 4.5 | 56.8 | 2.5 |
| 1400-62 | 62 | 59 | 2.15 | 2 | 4.5 | 57.8 | 2.5 |
| 1400-63 | 63 | 60 | 2.15 | 2 | 4.5 | 58.8 | 2.5 |
| 1400-64 | 64 | 61 | 2.15 | 2 | 4.5 | 59.8 | 2.5 |
| 1400-65 | 65 | 62 | 2.65 | 2.5 | 4.5 | 60.8 | 3 |
| 1400-67 | 67 | 64 | 2.65 | 2.5 | 4.5 | 62.5 | 3 |
| 1400-68 | 68 | 65 | 2.65 | 2.5 | 4.5 | 63.5 | 3 |
| 1400-70 | 70 | 67 | 2.65 | 2.5 | 4.5 | 65.5 | 3 |
| 1400-72 | 72 | 69 | 2.65 | 2.5 | 4.5 | 67.5 | 3 |
| 1400-75 | 75 | 72 | 2.65 | 2.5 | 4.5 | 70.5 | 3 |
| 1400-77 | 77 | 74 | 2.65 | 2.5 | 4.5 | 72.5 | 3 |
| 1400-78 | 78 | 75 | 2.65 | 2.5 | 4.5 | 73.5 | 3 |
| 1400-80 | 80 | 76.5 | 2.65 | 2.5 | 5.3 | 74.5 | 3 |
| 1400-82 | 82 | 78.5 | 2.65 | 2.5 | 5.3 | 76.5 | 3 |
| 1400-85 | 85 | 81.5 | 3.15 | 3 | 5.3 | 79.5 | 3.5 |
| 1400-87 | 87 | 83.5 | 3.15 | 3 | 5.3 | 81.5 | 3.5 |
| 1400-88 | 88 | 84.5 | 3.15 | 3 | 5.3 | 82.5 | 3.5 |
| 1400-90 | 90 | 86.5 | 3.15 | 3 | 5.3 | 84.5 | 3.5 |
| 1400-92 | 92 | 88.5 | 3.15 | 3 | 5.3 | 86.5 | 3.5 |
| 1400-95 | 95 | 91.5 | 3.15 | 3 | 5.3 | 89.5 | 3.5 |
| 1400-97 | 97 | 93.5 | 3.15 | 3 | 5.3 | 91.5 | 3.5 |
| 1400-98 | 98 | 94.5 | 3.15 | 3 | 5.3 | 91.5 | 3.5 |
| 1400-100 | 100 | 96.5 | 3.15 | 3 | 5.3 | 94.5 | 3.5 |
| 1400-102 | 102 | 98 | 4.15 | 4 | 6 | 95 | 3.5 |
| 1400-105 | 105 | 101 | 4.15 | 4 | 6 | 98 | 3.5 |
| 1400-110 | 110 | 106 | 4.15 | 4 | 6 | 103 | 3.5 |
| 1400-112 | 112 | 108 | 4.15 | 4 | 6 | 105 | 3.5 |
| 1400-115 | 115 | 111 | 4.15 | 4 | 6 | 108 | 3.5 |
| 1400-120 | 120 | 116 | 4.15 | 4 | 6 | 113 | 3.5 |
| 1400-122 | 122 | 118 | 4.15 | 4 | 6 | 115 | 4 |
| 1400-125 | 125 | 121 | 4.15 | 4 | 6 | 118 | 4 |
| 1400-127 | 127 | 123 | 4.15 | 4 | 6 | 120 | 4 |
| 1400-128 | 128 | 124 | 4.15 | 4 | 6 | 120 | 4 |
| 1400-130 | 130 | 126 | 4.15 | 4 | 6 | 123 | 4 |
| 1400-135 | 135 | 131 | 4.15 | 4 | 6 | 128 | 4 |
| 1400-140 | 140 | 136 | 4.15 | 4 | 6 | 133 | 4 |
| 1400-145 | 145 | 141 | 4.15 | 4 | 6 | 138 | 4 |
| 1400-150 | 150 | 145 | 4.15 | 4 | 7.5 | 142 | 4 |
| 1400-155 | 155 | 150 | 4.15 | 4 | 7.5 | 146 | 4 |
| 1400-160 | 160 | 155 | 4.15 | 4 | 7.5 | 151 | 4 |
| 1400-165 | 165 | 160 | 4.15 | 4 | 7.5 | 155.5 | 4 |
| 1400-170 | 170 | 165 | 4.15 | 4 | 7.5 | 160.5 | 4 |
| 1400-175 | 175 | 170 | 4.15 | 4 | 7.5 | 165.5 | 4 |
| 1400-180 | 180 | 175 | 4.15 | 4 | 7.5 | 170.5 | 4 |
| 1400-185 | 185 | 180 | 4.15 | 4 | 7.5 | 175.5 | 4 |
| 1400-190 | 190 | 185 | 4.15 | 4 | 7.5 | 180.5 | 4 |
| 1400-195 | 195 | 190 | 4.15 | 4 | 7.5 | 185.5 | 4 |
| 1400-200 | 200 | 195 | 4.15 | 4 | 7.5 | 190.5 | 4 |
Choosing the right option
Choose the circlip from the shaft diameter and machine the groove to the diameter G and width W for that size. The edge distance n (min) is the least distance between the groove and the end of the shaft, and the lug hole h (min) is the hole size for the circlip pliers.
Fit and remove with external circlip pliers, and check the circlip is fully seated in the groove.
Other circlips: Circlip External, 3 to 60mm Shaft, Packs of 5; Circlip External Stainless Steel, 4 to 55mm Shaft, Packs of 5; Circlip External, Heavy Duty, 12 to 100mm Shaft; Circlip Internal, 8 to 60mm Bore, Packs of 5.
They have dimensions to the DIN 471 normal type table for shafts.
| Option | Part number | SKU |
|---|---|---|
| 61 | 1400-61 | A0100455 |
| 62 | 1400-62 | A0100456 |
| 63 | 1400-63 | A0100457 |
| 64 | 1400-64 | A0100458 |
| 65 | 1400-65 | A0100459 |
| 67 | 1400-67 | A0100460 |
| 68 | 1400-68 | A0100461 |
| 70 | 1400-70 | A0100462 |
| 72 | 1400-72 | A0100463 |
| 75 | 1400-75 | A0100464 |
| 77 | 1400-77 | A0100465 |
| 78 | 1400-78 | A0100466 |
| 80 | 1400-80 | A0100467 |
| 82 | 1400-82 | A0100468 |
| 85 | 1400-85 | A0100469 |
| 87 | 1400-87 | A0100470 |
| 88 | 1400-88 | A0100471 |
| 90 | 1400-90 | A0100472 |
| 92 | 1400-92 | A0100473 |
| 95 | 1400-95 | A0100474 |
| 97 | 1400-97 | A0100475 |
| 98 | 1400-98 | A0100476 |
| 100 | 1400-100 | A0100477 |
| 102 | 1400-102 | A0100478 |
| 105 | 1400-105 | A0100479 |
| 110 | 1400-110 | A0100480 |
| 112 | 1400-112 | A0100481 |
| 115 | 1400-115 | A0100482 |
| 120 | 1400-120 | A0100483 |
| 122 | 1400-122 | A0100484 |
| 125 | 1400-125 | A0100485 |
| 127 | 1400-127 | A0100486 |
| 128 | 1400-128 | A0100487 |
| 130 | 1400-130 | A0100488 |
| 135 | 1400-135 | A0100489 |
| 140 | 1400-140 | A0100490 |
| 145 | 1400-145 | A0100491 |
| 150 | 1400-150 | A0100492 |
| 155 | 1400-155 | A0100493 |
| 160 | 1400-160 | A0100494 |
| 165 | 1400-165 | A0100495 |
| 170 | 1400-170 | A0100496 |
| 175 | 1400-175 | A0100497 |
| 180 | 1400-180 | A0100498 |
| 185 | 1400-185 | A0100499 |
| 190 | 1400-190 | A0100500 |
| 195 | 1400-195 | A0100501 |
| 200 | 1400-200 | A0100502 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Circlip External, 61 to 200 mm Shaft: 180
SKU: A0100498 | Model: 1400-180
Circlip External for a 180mm shaft, 175mm groove, 4mm thick. Part 1400-180.