Finer Power circlip Internal, bore diameter (d) mm 63
Available
These are internal circlips for bores, 53 sizes from 61 to 200mm bore diameter, sold individually. An internal circlip snaps into a groove machined in the bore and holds a bearing, gear or other component against axial movement.
Where this product is used
- Retaining bearings on shafts and in housings
- Locating gears, pulleys and sleeves on a shaft
- Holding pins, rollers and spacers in place
- Maintenance and repair where a circlip is lost or damaged
Features
- Internal circlips for bores
- 53 sizes, 61 to 200mm bore diameter
- Sold individually
- Groove diameter, groove width and ring thickness for every size
- Dimensions match the DIN 472 normal type circlip table
Key specifications
| Specification | Detail |
|---|---|
| Type | Internal circlip |
| Fits | Bore diameter 61 to 200mm |
| Sizes | 53 models |
| Ring thickness | 2 to 4mm |
| Groove diameter (G) | 64 to 205mm |
| Supplied | Individually |
Sizes available
| Part number | Bore dia. (mm) | Groove dia. G (mm) | Groove width W (mm) | Ring thickness t (mm) | Edge distance n min (mm) | Free dia. d (mm) | Lug hole h min (mm) |
|---|---|---|---|---|---|---|---|
| 1300-61 | 61 | 64 | 2.15 | 2 | 4.5 | 65.2 | 2.5 |
| 1300-62 | 62 | 65 | 2.15 | 2 | 4.5 | 66.2 | 2.5 |
| 1300-63 | 63 | 66 | 2.15 | 2 | 4.5 | 67.2 | 2.5 |
| 1300-64 | 64 | 67 | 2.15 | 2 | 4.5 | 68.2 | 2.5 |
| 1300-65 | 65 | 68 | 2.65 | 2.5 | 4.5 | 69.2 | 3 |
| 1300-67 | 67 | 70 | 2.65 | 2.5 | 4.5 | 71.5 | 3 |
| 1300-68 | 68 | 71 | 2.65 | 2.5 | 4.5 | 72.5 | 3 |
| 1300-70 | 70 | 73 | 2.65 | 2.5 | 4.5 | 74.5 | 3 |
| 1300-72 | 72 | 75 | 2.65 | 2.5 | 4.5 | 76.5 | 3 |
| 1300-75 | 75 | 78 | 2.65 | 2.5 | 4.5 | 79.5 | 3 |
| 1300-77 | 77 | 80 | 2.65 | 2.5 | 4.5 | 82.5 | 3 |
| 1300-78 | 78 | 81 | 2.65 | 2.5 | 4.5 | 82.5 | 3 |
| 1300-80 | 80 | 83.5 | 2.65 | 2.5 | 5.3 | 85.5 | 3 |
| 1300-81 | 81 | 84.5 | 2.65 | 2.5 | 5.3 | 86.5 | 3 |
| 1300-82 | 82 | 85.5 | 2.65 | 2.5 | 5.3 | 87.5 | 3 |
| 1300-83 | 83 | 86.5 | 2.65 | 2.5 | 5.3 | 88.5 | 3 |
| 1300-85 | 85 | 88.5 | 3.15 | 3 | 5.3 | 90.5 | 3.5 |
| 1300-87 | 87 | 90.5 | 3.15 | 3 | 5.3 | 93.5 | 3.5 |
| 1300-88 | 88 | 91.5 | 3.15 | 3 | 5.3 | 93.5 | 3.5 |
| 1300-90 | 90 | 93.5 | 3.15 | 3 | 5.3 | 95.5 | 3.5 |
| 1300-92 | 92 | 95.5 | 3.15 | 3 | 5.3 | 97.5 | 3.5 |
| 1300-95 | 95 | 98.5 | 3.15 | 3 | 5.3 | 100.5 | 3.5 |
| 1300-97 | 97 | 100.5 | 3.15 | 3 | 5.3 | 103.5 | 3.5 |
| 1300-98 | 98 | 101.5 | 3.15 | 3 | 5.3 | 103.5 | 3.5 |
| 1300-100 | 100 | 103.5 | 3.15 | 3 | 5.3 | 105.5 | 3.5 |
| 1300-102 | 102 | 106 | 4.15 | 4 | 6 | 108 | 3.5 |
| 1300-105 | 105 | 109 | 4.15 | 4 | 6 | 112 | 3.5 |
| 1300-107 | 107 | 111 | 4.15 | 4 | 6 | 115 | 3.5 |
| 1300-108 | 108 | 112 | 4.15 | 4 | 6 | 115 | 3.5 |
| 1300-110 | 110 | 114 | 4.15 | 4 | 6 | 117 | 3.5 |
| 1300-112 | 112 | 116 | 4.15 | 4 | 6 | 119 | 3.5 |
| 1300-115 | 115 | 119 | 4.15 | 4 | 6 | 122 | 3.5 |
| 1300-117 | 117 | 121 | 4.15 | 4 | 6 | 125 | 3.5 |
| 1300-118 | 118 | 122 | 4.15 | 4 | 6 | 125 | 3.5 |
| 1300-120 | 120 | 124 | 4.15 | 4 | 6 | 127 | 3.5 |
| 1300-125 | 125 | 129 | 4.15 | 4 | 6 | 132 | 4 |
| 1300-127 | 127 | 131 | 4.15 | 4 | 6 | 135 | 4 |
| 1300-128 | 128 | 132 | 4.15 | 4 | 6 | 135 | 4 |
| 1300-130 | 130 | 134 | 4.15 | 4 | 6 | 137 | 4 |
| 1300-135 | 135 | 139 | 4.15 | 4 | 6 | 142 | 4 |
| 1300-140 | 140 | 144 | 4.15 | 4 | 6 | 147 | 4 |
| 1300-145 | 145 | 149 | 4.15 | 4 | 6 | 152 | 4 |
| 1300-150 | 150 | 155 | 4.15 | 4 | 7.5 | 158 | 4 |
| 1300-155 | 155 | 160 | 4.15 | 4 | 7.5 | 164 | 4 |
| 1300-160 | 160 | 165 | 4.15 | 4 | 7.5 | 169 | 4 |
| 1300-165 | 165 | 170 | 4.15 | 4 | 7.5 | 174.5 | 4 |
| 1300-170 | 170 | 175 | 4.15 | 4 | 7.5 | 179.5 | 4 |
| 1300-175 | 175 | 180 | 4.15 | 4 | 7.5 | 184.5 | 4 |
| 1300-180 | 180 | 185 | 4.15 | 4 | 7.5 | 189.5 | 4 |
| 1300-185 | 185 | 190 | 4.15 | 4 | 7.5 | 194.5 | 4 |
| 1300-190 | 190 | 195 | 4.15 | 4 | 7.5 | 199.5 | 4 |
| 1300-195 | 195 | 200 | 4.15 | 4 | 7.5 | 204.5 | 4 |
| 1300-200 | 200 | 205 | 4.15 | 4 | 7.5 | 209.5 | 4 |
Choosing the right option
Choose the circlip from the bore diameter and machine the groove to the diameter G and width W for that size. The edge distance n (min) is the least distance between the groove and the face of the housing, and the lug hole h (min) is the hole size for the circlip pliers.
Fit and remove with internal circlip pliers, and check the circlip is fully seated in the groove.
Other circlips: Circlip Internal, 8 to 60mm Bore, Packs of 5; Circlip Internal Stainless Steel, 10 to 55mm Bore, Packs of 5; Circlip External, 3 to 60mm Shaft, Packs of 5; Circlip External, 61 to 200mm Shaft.
They have dimensions to the DIN 472 normal type table for bores.
| Option | Part number | SKU |
|---|---|---|
| 61 | 1300-61 | A0100346 |
| 62 | 1300-62 | A0100347 |
| 63 | 1300-63 | A0100348 |
| 64 | 1300-64 | A0100349 |
| 65 | 1300-65 | A0100350 |
| 67 | 1300-67 | A0100351 |
| 68 | 1300-68 | A0100352 |
| 70 | 1300-70 | A0100353 |
| 72 | 1300-72 | A0100354 |
| 75 | 1300-75 | A0100355 |
| 77 | 1300-77 | A0100356 |
| 78 | 1300-78 | A0100357 |
| 80 | 1300-80 | A0100358 |
| 81 | 1300-81 | A0100359 |
| 82 | 1300-82 | A0100360 |
| 83 | 1300-83 | A0100361 |
| 85 | 1300-85 | A0100362 |
| 87 | 1300-87 | A0100363 |
| 88 | 1300-88 | A0100364 |
| 90 | 1300-90 | A0100365 |
| 92 | 1300-92 | A0100366 |
| 95 | 1300-95 | A0100367 |
| 97 | 1300-97 | A0100368 |
| 98 | 1300-98 | A0100369 |
| 100 | 1300-100 | A0100370 |
| 102 | 1300-102 | A0100371 |
| 105 | 1300-105 | A0100372 |
| 107 | 1300-107 | A0100373 |
| 108 | 1300-108 | A0100374 |
| 110 | 1300-110 | A0100375 |
| 112 | 1300-112 | A0100376 |
| 115 | 1300-115 | A0100377 |
| 117 | 1300-117 | A0100378 |
| 118 | 1300-118 | A0100379 |
| 120 | 1300-120 | A0100380 |
| 125 | 1300-125 | A0100381 |
| 127 | 1300-127 | A0100382 |
| 128 | 1300-128 | A0100383 |
| 130 | 1300-130 | A0100384 |
| 135 | 1300-135 | A0100385 |
| 140 | 1300-140 | A0100386 |
| 145 | 1300-145 | A0100387 |
| 150 | 1300-150 | A0100388 |
| 155 | 1300-155 | A0100389 |
| 160 | 1300-160 | A0100390 |
| 165 | 1300-165 | A0100391 |
| 170 | 1300-170 | A0100392 |
| 175 | 1300-175 | A0100393 |
| 180 | 1300-180 | A0100394 |
| 185 | 1300-185 | A0100395 |
| 190 | 1300-190 | A0100396 |
| 195 | 1300-195 | A0100397 |
| 200 | 1300-200 | A0100398 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Circlip Internal, 61 to 200 mm Bore: 63
SKU: A0100348 | Model: 1300-63
Circlip Internal for a 63mm bore, 66mm groove, 2mm thick. Part 1300-63.