ClayTech CLA BLUESUB10 Blue SUB10 Light Construction Pump with Float
Available
The ClayTech Blue SUB10 is a submersible light construction pump with a float switch, made for dewatering construction sites and pits and for general dewatering where there is abrasive material. It is rated at 750 W with a maximum flow of 250 L/min and a maximum head of 18 m (manufacturer-stated).
It has a cast iron hydraulic body, a single urethane-coated impeller and dual mechanical seals in an oil bath, and it handles particles up to 10 x 25 mm (manufacturer-stated). The flexible float switch starts and stops the pump with the water level. The outlet is 3 inch with a 45 degree elbow to a 2 inch camlock (manufacturer-stated).
Where this product is used
- Dewatering construction sites and pits. (manufacturer-stated)
- Storm water and basement pumping. (manufacturer-stated)
- General dewatering where the water carries abrasive material. (manufacturer-stated)
- Pumping water with suspended solids, sandy and stringy material. (manufacturer-stated)
Features
- Float switch for automatic operation (manufacturer-stated)
- Cast iron hydraulic body with a urethane-coated impeller (manufacturer-stated)
- Dual mechanical seals in an oil bath (manufacturer-stated)
- Handles particles up to 10 x 25 mm (manufacturer-stated)
- IP68 with a 10 m H07RN-F power cable (manufacturer-stated)
- In-built auto-resetting thermal overload (manufacturer-stated)
Key specifications
| Specification | Detail |
|---|---|
| Rated power | 750 W (manufacturer-stated) |
| Voltage | 220-240 V, 50 Hz (manufacturer-stated) |
| Rated current | 5.6 A at 230 V (manufacturer-stated) |
| Maximum flow | 250 L/min (manufacturer-stated) |
| Maximum head | 18 m (manufacturer-stated) |
| Outlet | 3 inch with 45 degree elbow to 2 inch camlock (manufacturer-stated) |
| Maximum particle size | 10 x 25 mm (manufacturer-stated) |
| Protection class | IP68 (manufacturer-stated) |
| Maximum immersion depth | 7 m (manufacturer-stated) |
| Liquid temperature | 2 to 35 degrees C (manufacturer-stated) |
| Power cable | 10 m H07RN-F (manufacturer-stated) |
| Motor duty | S1 continuous (manufacturer-stated) |
| Net weight, pump only | 19.2 kg (manufacturer-stated) |
Selecting the right option
The manual states that the pump must not run for longer than 10 minutes partially submerged, must not run dry, should not start more than 20 times in any one hour, and must not be used with flammable or corrosive fluids. It should be supplied through an RCD (manufacturer-stated). For lower-flow drainage see the BlueVort 9 drainage pump or the BlueVort 7 drainage pump; for a polypropylene drainage pump with a 38 mm solids passage see the BVP C11 drainage pump.
Related products
Related ClayTech drainage pumps: BlueVort 9 drainage pump, BlueVort 7 drainage pump, BVP C11 drainage pump and ProSub C6 and C9 drainage pumps.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details

