CRC Aeroclean Degreaser 400g

CRC Aeroclean is a highly concentrated, self-emulsifying solvent degreaser in a 400g aerosol. It quickly dissolves grease, oil and dirt and rinses off easily with water.

It suits cleaning and degreasing automobile engines, industrial equipment, farm equipment, lawn mowers, garage floors and tools. It is a flammable aerosol, UN 1950, Class 2.1.

Where this product is used

• Automobile engines
• Industrial equipment
• Farm equipment and lawn mowers
• Garage floors
• Tools

Features

• Highly concentrated, self-emulsifying solvent degreaser
• Quickly dissolves grease, oil and dirt
• Cleans iron, steel, aluminium, magnesium and copper
• Rinses off easily with water
• It is not harmful to metal, rubber, plastic or concrete, test on a small area first
• Carbon dioxide propellant

Key specifications

Choosing the right option

For a non-flammable alternative see CRC NF Aeroclean Degreaser 400g Aerosol - Pack of 6, which is a separate CRC product. For a 500g degreaser see CRC Hot Shot Degreaser 500g.

See also: CRC Hot Shot Degreaser 500g, CRC Heavy Duty Parts Cleaner 400g, CRC NF Aeroclean Degreaser 400g Aerosol - Pack of 6.

Using it

Provide adequate ventilation. For engine cleaning, warm the engine for easier cleaning and then turn it off, remove the air filter, and protect the carburettor and distributor.

Shake the can thoroughly before use. The can is at room temperature. Hold the can 20 to 25cm from the surface and apply an even coat. Allow it to soak for 10 to 20 minutes depending on soil build-up, and repeat if required.

Rinse with a strong jet of water, then idle the engine to dry.

It rinses off easily with water, and its directions call for a strong jet of water.

Maximum temperature 36 °C.

Storage and handling

Do not puncture, incinerate or store above 50 °C.

Limits and safety

Hazard classification: Warning. Flammable aerosol, Category 2 (H223), pressurised container that may burst if heated (H229), repeated exposure may cause skin dryness or cracking (AUH066). Flash point 36 °C; UN 1950, Class 2.1. Keep away from heat and ignition sources. Test on a small area before use. Read the safety data sheet before use.