CRC Electrical Silicone Multi-Use Lubricant 300g Aerosol

CRC Electrical Silicone is a multi-purpose silicone spray. It suits lubricating, waterproofing and protecting rubber, plastic, metal, nylon and wood, and for protecting and lubricating tools, hoists, jacks, locks, latches, switches, controls, zippers and pulleys.

It leaves a dry, clear, non-hardening film and is also a mould release for plastics and composites. De-energise equipment before applying it.

Where this product is used

• Lubricating, waterproofing and protecting rubber, plastic, metal, nylon and wood
• Restoring, protecting and preserving rubber mats, mountings and seals, vinyl tops, weather stripping, dashboards, door mouldings and plastic parts
• Protecting and lubricating tools, hoists, jacks, locks, latches, switches, controls, zippers and pulleys
• Mould release for plastics and composites

Features

• Multi-purpose silicone spray
• Dry, clear, non-hardening film
• Temperature range of -40 °C to 260 °C
• Pour point of -46 °C
• Works as a mould release for plastics and composites

Key specifications

Choosing the right option

For other CRC silicone sprays see CRC Aerosol 808 Silicone Spray Multi-Purpose Enhancer, Lubricant & Protectant 330g, CRC Aerosol Extreme Duty Silicone Lubricant 300g and CRC Automotive Silicone Lubricant & Protectant Aerosol 300g. Each has its own data sheet, temperature range and hazard classification.

See also: CRC Aerosol 808 Silicone Spray Multi-Purpose Enhancer, Lubricant & Protectant 330g, CRC Aerosol Extreme Duty Silicone Lubricant 300g, CRC Automotive Silicone Lubricant & Protectant Aerosol 300g.

Using it

Shake the can well.

De-energise equipment before applying, and do not spray on energised equipment.

Apply to a clean surface and spray a light, even film.

Repeat the application if necessary.

Storage and handling

Protect from sunlight and do not expose to temperatures above 50 °C. Keep away from heat and ignition sources. Do not pierce or burn the can, even after use. The pressurised container may burst if heated.

Limits and safety

Hazard classification: signal word Danger. Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). Transport class UN 1950, Aerosols, Class 2.1. Do not spray on energised equipment; aerosol cans conduct electricity. The flash point and specific gravity for the concentrate without propellant do not describe the aerosol can. Incompatible with oxidising agents (for example hypochlorites), acids (for example nitric acid), alkalis (for example sodium hydroxide) and heat and ignition sources. Read the safety data sheet before use.