CRC Tackle Guard Fishing Tackle Protectant 100g Aerosol

CRC Tackle Guard is an aerosol corrosion protectant and lubricant that CRC formulated for use on fishing tackle. It is for all fresh and salt water fishing reels and tackle, as a moisture barrier and as an environmental shield against humidity and salt air.

It does not damage monofilament or EVA grips and it is fishing line safe. It contains no silicone.

Where this product is used

• All fresh and salt water fishing reels and tackle
• Preventative maintenance of reels and tackle
• Environmental shield against humidity and salt air
• Displacing water from wet equipment
• Freeing rusted or corroded parts

Features

• Moisture eliminator for wet equipment, and a moisture barrier
• Protective film seals out moisture and protects against corrosion
• Lubricates, and helps free rusted or corroded parts
• Does not damage monofilament or EVA grips and seals and is fishing line safe
• Contains no silicone
• Continuous, self-repairing film

Key specifications

Choosing the right option

For marine engines and boating equipment see CRC 5-56 Marine Multi-Purpose Oil 300g. For a general multi-purpose lubricant see CRC 5-56 Multi-Purpose Lubricant. Each has its own data sheet and hazard classification.

See also: CRC 5-56 Marine Multi-Purpose Oil 300g, CRC 5-56 Multi-Purpose Lubricant, CRC Aerosol Long Life Anti Rust Lubricant 300g.

Using it

Read the entire label. Spray a light, even coat.

Use a light spray once a day during fishing.

At the end of the season, or earlier with heavy use or continuous exposure, take reels apart, clean and lube them, then spray liberally.

To loosen rusted or seized parts, apply liberally; full penetration may take several hours. To displace water, spray wet surfaces until the run-off is clear.

Do not use on energised equipment, and allow the solvent to evaporate before energising (up to four hours). Use in a well-ventilated area.

Storage and handling

Protect from sunlight and do not expose to temperatures above 50 °C. Keep away from heat and ignition sources. Do not pierce or burn the can, even after use. The pressurised container may burst if heated.

Limits and safety

Hazard classification: signal word Danger. Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). Transport class UN 1950, Aerosols, Class 2.1. The flash point of 79 °C is for the concentrate without propellant and does not describe the aerosol can. Do not use on energised equipment, and use in a well-ventilated area. Aerosol cans conduct electricity, so keep them away from live electrical sources. Read the safety data sheet before use.