CRC Wire Rope & Cable Lubricant 285g Aerosol

CRC Wire Rope & Cable Lubricant is a blend of synthetic lubricants, solvents and molybdenum, designed to keep chains and wire rope lubricated. It operates effectively at temperatures up to 175 °C continuous.

Its low viscosity penetrates and coats interior wire strands and cushion pins, and the molybdenum gives it cling, so it avoids sling-off, drips and pooling at the lower ends of vertically hung chains and ropes.

Where this product is used

• Low speed conveyor and drive chains
• Hoists, winches and pulleys
• Cushion pins and rollers
• Garage doors, bushings, seals and o-rings
• Come-alongs

Features

• Low viscosity penetrates and coats interior wire strands and cushion pins
• Molybdenum gives cling: avoids sling-off, drips and pooling on vertical chains and ropes
• Helps inhibit corrosion and reduce load stress
• Helps prevent wire strands becoming brittle and fraying
• Operates effectively up to 175 °C continuous
• Non-drying film

Key specifications

Choosing the right option

For a PTFE lubricant with extreme pressure additives see CRC Aerosol Power Lube With PTFE High Performance Lubricant 300g. For a food grade chain lubricant see CRC Aerosol Chain Lube Food Grade 340g. Each has its own data sheet and hazard classification.

See also: CRC Aerosol Power Lube With PTFE High Performance Lubricant 300g, CRC Aerosol Chain Lube Food Grade 340g, CRC Aerosol Long Life Anti Rust Lubricant 300g, CRC 5-56 Multi-Purpose Lubricant.

Using it

Chain: apply to the upper edges of the overlapping chain side plates and allow the lubricant to set up before energising.

Wire rope: spray a light, even coat over the entire surface.

Do not apply while equipment is energised, in any application.

Storage and handling

Protect from sunlight and do not expose to temperatures above 50 °C. Keep away from heat and ignition sources. Do not pierce or burn the can, even after use. The pressurised container may burst if heated.

Limits and safety

Hazard classification: signal word Danger. Extremely flammable aerosol (H222). Pressurised container: may burst if heated (H229). Causes skin irritation (H315). May cause drowsiness or dizziness (H336). Toxic to aquatic life with long lasting effects (H411). Transport class UN 1950, Aerosols, Class 2.1. Do not apply while equipment is energised. Read the safety data sheet before use.

It is a blend of synthetic lubricants, solvents and molybdenum, with a tackifier that lets it cling without increasing viscosity.