CRC Food Grade Machine Oil 312g Aerosol

CRC Food Grade Machine Oil is a highly refined machine oil in a 312g aerosol. CRC describes it as a clear, colourless, odourless, non-silicone oil that leaves a thin, oily, non-drying film.

CRC lists it for circulation systems lubricating gears and bearings on all food processing equipment. CRC states it is NSF H1 registered for incidental food contact.

Where this product is used

• Circulation systems lubricating gears on food processing equipment
• Circulation systems lubricating bearings on food processing equipment

Features

• NSF H1 registered for incidental food contact (CRC technical data sheet wording)
• CRC states it meets the US FDA regulations 21 CFR 172.878, 21 CFR 178.3620 and 21 CFR 573.680 for incidental food contact
• Highly refined machine oil with a viscosity of 38-41 cSt at 40 °C
• Non-silicone, clear and colourless
• Thin, oily, non-drying film
• Continuous service temperature -20 °C to +150 °C, intermittent +170 °C
• 360 degree valve for spraying from any angle

Key specifications

Selecting the right option

This is a light machine oil for circulation systems. For a non-silicone food grade penetrating oil see CRC Non Silicone Food Grade Penetrating Oil 312g. For food grade greases see CRC White Grease Food Grade 284g and CRC Food Grade Multi-Purpose Grease 397g.

Using it

Do not apply to energised equipment.

Hold the can 20-30 cm from the surface and spray a light, even film. Wipe off excess with a cloth and reapply when necessary.

Storage and handling

CRC gives a conditional warranty of 5 years from date of manufacture. Keep the can away from heat and do not expose it to temperatures above 50 °C.

Limits and safety

SDS classification: signal word Danger. Flammable aerosol (H223). Pressurised container: may burst if heated (H229). May be fatal if swallowed and enters airways (H304). Causes skin irritation (H315). May cause drowsiness or dizziness (H336). Toxic to aquatic life (H401). Transport class: UN 1950, Aerosols, Class 2.1. The 70 °C flash point is for the liquid component only; the can is classed as a flammable aerosol, so keep it away from heat and ignition sources. Do not apply to energised equipment. Read the safety data sheet before use.

Frequently asked questions

What is CRC Food Grade Machine Oil used for?

CRC states it is for circulation systems lubricating gears and bearings on all food processing equipment.

Is CRC Food Grade Machine Oil NSF H1 registered?

CRC's technical data sheet states 'NSF H1 Registered for incidental food contact'. The NSF registration is No. 130883, in a letter dated 01/08/03.

What temperature range can CRC Food Grade Machine Oil be used over?

CRC gives -20 °C to +150 °C continuous and +170 °C intermittent.

What is the flash point of CRC Food Grade Machine Oil?

CRC's current safety data sheet and technical data sheet give 70 °C for the liquid component. The aerosol is still classed as a flammable aerosol (H223), so keep it away from heat and ignition sources.

Does CRC Food Grade Machine Oil contain silicone?

No. CRC describes it as a non-silicone, highly refined machine oil.

How do I apply CRC Food Grade Machine Oil?

Hold the can 20-30 cm from the surface and spray a light, even film, then wipe off the excess. Do not apply to energised equipment.

Related products

See also: CRC Non Silicone Food Grade Penetrating Oil 312g, CRC White Grease Food Grade 284g, CRC Aerosol Chain Lube Food Grade 340g, CRC Food Grade Multi-Purpose Grease 397g, CRC Belt Dressing Food Grade 284g.