CRC Industrial Food Grade Silicone Grease 75ml

CRC Food Grade Silicone Grease is a thin, non-curing silicone grease in a 75ml tube, with no propellant. It is sealing, lubricating and waterproofing O-rings and other rubber and plastic parts in food processing equipment.

It suits insulating valves, electrical contacts, spark plugs, battery terminals and fasteners from moisture, and for protecting against corrosion. It will not harden, freeze, dry or melt across -40 °C to +200 °C.

Where this product is used

• O-rings and other rubber and plastic parts in food processing equipment
• Valves, electrical contacts and spark plugs, to insulate from moisture
• Battery terminals and fasteners, to insulate from moisture
• Protection against corrosion

Features

• Thin, non-curing silicone grease that seals, lubricates, protects, insulates and waterproofs
• Temperature range of -40 °C to +200 °C
• Will not harden, freeze, dry or melt
• It is safe on most rubbers and plastics
• Chemical, oil and water resistant
• Flash point above 300 °C
• Not a dangerous good for transport

Key specifications

Choosing the right option

This is a grease in a tube for sealing, lubricating and insulating. For other CRC food grade lubricants see CRC Food Grade Multi-Purpose Grease 397g and CRC Food Grade Silicone Spray Multi-Purpose 283g.

See also: CRC Food Grade Silicone Spray Multi-Purpose 283g, CRC Food Grade Multi-Purpose Grease 397g, CRC Food Grade Synthetic Grease 397g, CRC Di-Electric Grease Food Grade 94g.

Using it

Shut off power, drain stored power and let hot surfaces cool.

Clean surfaces, connectors and contacts, then apply the grease liberally as required.

Do not apply while equipment is energised.

Storage and handling

See the safety data sheet for handling and storage advice.

Limits and safety

It is combustible (flammability class C2), so keep it away from naked flames and ignition sources. Trace formaldehyde may be released when the grease is heated above 150 °C in air. It is not suitable for use with hydraulic brake cylinder pads, and must not be used for LPG, LNG, compressed oxygen, chlorine or air systems. Read the safety data sheet before use.