CRC Water Based Food Grade Silicone Spray 369g

CRC Water Based Silicone is a multi-purpose silicone spray for food processing and handling applications, supplied as a 369g aerosol. It is NSF H1 registered for incidental food contact. It is a water-based silicone emulsion that forms a non-staining film.

It eliminates sticking and binding while protecting most surfaces, reduces galling and friction, and eases metal-to-non-metal contact areas. The film is non-hardening and minimises corrosion, and it is harmless to most rubbers and plastics. Do not apply it while equipment is energised.

Where this product is used

• Food processing and handling equipment: chutes, guides, rails and conveyors
• Bottling machinery, slicers, ovens and freezers
• Knives and saws
• Linkages, locks, pulleys, timers and tools
• Rubber seals and ceramic insulators
• Metal-to-non-metal and plastic-to-plastic lubrication

Features

• NSF H1 registered for incidental food contact
• Water-based silicone emulsion, creamy white liquid that forms a non-staining film
• Non-hardening film that minimises corrosion
• Eliminates sticking and binding while protecting most surfaces
• Reduces galling and friction and eases metal-to-non-metal contact areas
• It is harmless to most rubbers and plastics
• Extension tube use for pinpoint accuracy

Key specifications

Choosing the right option

For other CRC food grade silicone formats see CRC Lubricant Food Grade Silicone NSF H1 Multi-Purpose Spray 443ml and CRC Food Grade Silicone Spray Multi-Purpose 283g.

See also: CRC Lubricant Food Grade Silicone NSF H1 Multi-Purpose Spray 443ml, CRC Food Grade Silicone Spray Multi-Purpose 283g, CRC Industrial Silicone Mould Release Food Grade 326g.

Using it

Directions: do not apply while equipment is energised. Shake the can before using. Hold the can 20-30cm away from the surface to be sprayed. Use the extension tube for pinpoint accuracy.

The amount used should be the minimum required to accomplish the desired technical effect on the equipment.

Storage and handling

Do not puncture, incinerate or store above 50°C. Store in a cool, dry, well ventilated area, away from heat or ignition sources.

Limits and safety

Classified as hazardous under Safe Work Australia criteria (GHS only) as a pressurised aerosol, Category 3. Signal word Warning. H229: pressurised container, may burst if heated. UN 1950, AEROSOLS, Class 2.2. It is not classified as a flammable aerosol, but the can holds a hydrocarbon propellant (liquefied petroleum gas 8 to 12%), so store it away from heat or ignition sources. Do not apply while equipment is energised. NSF H1 is a registration for incidental food contact. Read the safety data sheet before use.

It contains water 70 to 80%, white mineral oil 10 to 20%, liquefied petroleum gas propellant 8 to 12% and dimethyl siloxane 2 to 5%.

A 369g aerosol, CRC item FG03035.