Dixon BioPharm solid end cap, 6"

This is the Dixon BioPharm Solid End Cap PM Finish - SF4.

This Dixon BioPharm solid end cap closes off the end of a clamp-style BPE tube connection. It is 316 stainless steel and comes in 7 sizes: one cap for 1/2" and 3/4" tube, one for 1" and 1-1/2" tube, then 2, 2-1/2, 3, 4 and 6". The PM finish (SF4) has a mechanically polished outside (.812) and an inside that is mechanically polished and then electropolished (.381).

The cap is made to ASME BPE 2012. Its packing page says each fitting is capped for transport, with a white cap marking the PM finish.

Where this product is used

• Transport of liquid media in the biotechnology, cosmetic and pharmaceutical industries
• Blanking off an unused clamp connection on a BPE tube run or vessel outlet
• Systems where an electropolished inside surface (.381) is specified for product-contact tube

Features

• Solid end cap in the BioPharmaceutical Fittings (BPE) range
• PM finish (SF4): outside.812 mechanically polished, inside.381 mechanically polished and electropolished
• Made to ASME BPE 2012
• Sizes: one cap each for 1/2 to 3/4" and 1 to 1-1/2" tube, then 2 to 6"

Key specifications

Choosing the right option

Choose the cap by the tube size of the clamp connection it closes. The 1/2 to 3/4" and 1 to 1-1/2" caps each cover two tube sizes, so check the size against your ferrule or tube before ordering. The PM finish is electropolished inside; the PL finish is mechanically polished inside and out.

Mechanical polishing is smoothing the surface with tools and progressively finer abrasives, and electropolishing as an electrochemical process that removes material and leaves a smoother, mirror-like surface.

Related Dixon products: Dixon BioPharm Solid End Cap PL Finish - SF1, Dixon Automatic Weld Ferrule PM Finish - SF4 and Dixon 304 Stainless Steel Sanitary Single Pin Squeeze Clamp.

Product details