Dixon H1102520 25 mm PVC Drum Pump Hose

This Dixon PVC hose is made for dispensing fuel and oil from overhead tanks and drums (manufacturer-stated). It has a black PVC tube, a smooth black PVC cover and polyester yarn reinforcement, it is UV stabilised and abrasion resistant, and it is extruded (manufacturer-stated). The store lists the 25 mm and 32 mm sizes.

Dixon rates the H110 range at 150 PSI (10 bar) working pressure and 600 PSI (40 bar) burst, for temperatures from -5 to 60 degrees C (manufacturer-stated).

Where this product is used

• Dispensing fuel and oil from overhead tanks and drums (manufacturer-stated).
• Fuel and oil transfer lines from drums and tanks, within the pressure and temperature range.

Features

• Tube: PVC, black; cover: PVC, smooth, black; polyester yarn reinforcement (manufacturer-stated)
• Working pressure 150 PSI (10 bar), burst 600 PSI (40 bar) (manufacturer-stated)
• Temperature range -5 to 60 degrees C (manufacturer-stated)
• UV stabilised and abrasion resistant (manufacturer-stated)

Common specifications

Key specifications

Figures are from the H110 table in Dixon's Industrial Hose catalogue. The catalogue weight for the 25.4 mm size is printed as 035, which is not a usable figure, so none is shown.

Selecting the right option

Pick the size from the pump or tank outlet and use hose tails or fittings made for fuel and oil service. The catalogue gives no vacuum rating, so do not assume it will hold up under suction from a pump inlet. Keep the hose within the -5 to 60 degrees C range and out of heat sources.

Related products

Related Dixon hose: Dixon Rubber Petrol & Oil Delivery Hose, Dixon Rubber Petrol & Oil Suction & Delivery Hose, Dixon PVC Medium Heavy Duty Petrol & Oil Suction Hose and Dixon Rubber Fuel Hose.