Dixon Boss washer seal female spud, 3/4"

This Dixon Boss female spud is the washer seal type, with a female NPT thread. The washer seal design uses a Klingersil C-4401 washer between the stem and the spud. This range covers four sizes: 1/2", 3/4", 1" and 1-1/2".

The washer seal is easy to seal: the leakproof seal forms by rotating the wing nut and hammering it tight, and the fittings are used with Boss clamps. The Boss couplings up to 2" is rated at 600 PSI (41 bar) for air and water and 230 PSI (15.8 bar) for steam.

Where this product is used

• Boss hose couplings for steam, air, water and fluid petroleum chemicals, where a female spud is fixed to equipment and a stem is clamped to the hose
• Washer seal assemblies that are made up with Boss clamps

Features

• Washer seal type female spud with a female NPT thread
• Klingersil C-4401 washer between the stem and the spud
• Seal forms by rotating the wing nut and hammering it tight
• Used with Boss clamps
• Coupling rating up to 2": 600 PSI (41 bar) air and water, 230 PSI (15.8 bar) steam

Key specifications

Choosing the right option

Match the size and the seal type. Worn-out hose couplings can be dangerous and should be checked regularly and replaced when necessary.

Related Dixon products: Dixon Wing Nut Plated Iron, Dixon Ground Joint Male Spud NPT Polymer and Dixon Ground Joint Male Spud BSP Polymer.