Euroboor TCT annular cutters, 12

Euroboor 55mm depth of cut TCT annular cutters are tungsten carbide tipped cutters with a 19.05mm (3/4") Nitto/Weldon shank, produced for very hard and difficult materials such as Hardox, stainless steel and railway tracks. There are 53 sizes from 12mm to 64mm diameter in 1mm steps.

Different pilot pin by size: IBC.100R for 12mm to 14mm, IBC.90 for 15mm to 17mm and IBC.80 for 18mm and larger. Its cutters have an extra landing on the outside that cuts more accurately with less friction and a ground conical taper inside that gives the slug room. TCT cutters have up to three different teeth and need a higher speed than HSS cutters.

Where this product is used

• Drilling stainless steel on a magnetic drilling machine
• Drilling very hard materials such as Hardox
• Drilling aluminium and exotic materials such as Inconel and Hastelloy
• Drilling railway tracks

Features

• Tungsten carbide tipped cutter with a 55mm depth of cut
• 12mm to 64mm diameters in 1mm steps
• 19.05mm (3/4") Nitto/Weldon shank
• Pilot pin IBC.100R, IBC.90 or IBC.80 depending on size
• Up to three different teeth
• Teeth can be sharpened

Key specifications

Choosing the right option

Pick the diameter, then the pilot pin shown for that size in the specifications. This is the 55mm depth of cut TCT series; for a shallower cut see the Euroboor 35mm depth of cut TCT cutters. For plain steel work the 55mm depth of cut HSS cutters may be the more usual choice, and TCT cutters need a higher speed than HSS cutters. The IBC.80 and IBC.90 pins are in the Euroboor ejection pilot pin range.

See also: Euroboor ejection pilot pins, Euroboor 32 x 55mm rail annular cutter, MT2 arbor.