M6 Eye Terminal, 316 Stainless Steel - ETEA4M6X32

Made in 316 (A4) stainless steel, the Eye Terminal is a stainless swage fitting with a closed eye at one end. The other end is swaged onto wire rope.

This listing has 4 variants covering sizes M6 to M12. Variants are supplied in packs of 2 to 10, depending on size.

Supplied in 316 (A4) stainless steel. The molybdenum in A4 gives better resistance to chlorides than A2 (304), so it is the usual choice near the coast, around pools and in marine and food-processing environments.

Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.

Where this product is used

• Food and beverage processing equipment
• Swimming pool and spa equipment
• Coastal and architectural fittings
• Shade sails, awnings and tensioned structures
• Balustrade and wire fencing

Features

• Pack quantities to suit trade and bulk buying: packs of 2 to 10
• Closed eye end connects to shackles and eyes
• Swaged onto wire rope
• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
• Choice of 4 sizes, M6 to M12

Key specifications

Selecting the right option

Choose the terminal by the wire rope diameter shown on the variant. A swaging tool is needed.

Important

This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.