Hobson HXFEM-01.6 1.6 x 9mm Machine Wire Rope Ferrule, Copper, Nickel Plated

The Hobson machine wire rope ferrule is a copper ferrule with a nickel plated finish, listed in 8 rope sizes: 1.6, 2, 2.5, 3.2, 4, 5, 6 and 10mm. Each item is supplied as a single ferrule (supplier unit: each).

A ferrule is pressed onto a wire rope to form a loop or to hold a rope end.

The published product details give the size (rope size and length), the metal, the plating and the unit. It does not give a breaking load, a swaging or crimping method, or any standard, so none are published.

Where this product is used

• Terminating or forming a loop in wire rope with a pressed ferrule
• Holding the end of a wire rope where a pressed ferrule suits the rope size

Features

• 8 rope sizes: 1.6 to 10mm
• Machine wire rope ferrule
• Copper, nickel plated
• Length shown for each size
• Supplier unit: each

Common specifications

Key specifications

Selecting the right option

Choose the ferrule by rope size: the rope size is the first figure in each size (for example 1.6 x 9mm is for 1.6mm rope) and matches the Rope option. The published product details state no breaking load and no pressing method, so do not use these ferrules in a lifting assembly unless the finished assembly is rated and certified.

Related products

Related products: Hobson Open Body Turnbuckle, Eye and Eye, Mild Steel, Galvanised, M5 to M20, Hobson Open Body Turnbuckle, Hook and Eye, Mild Steel, Galvanised, M5 to M20 and Hobson Masonry Xbolt Eye, Zinc Yellow Passivate, M8 to M12, Box of 50.