Frontier 3/4 dipped insulated cut C glove, Medium

Frontier Cold Fighter is a 3/4 dipped insulated glove with a Dyneema shell and a terry lining. The HPT foam coating is described as water and oil repellent, soft and flexible in low temperatures, and the glove is sanitised with Actifresh.

The EN 511 rating is 0 for convective cold, 2 for contact cold and X for water, so the glove has no convective cold rating. Check the temperature range for your job before you rely on the glove. The EN 388 result is read in the order abrasion, blade cut, tear and puncture, followed by a cut letter where it is tested. An X means that test was not done. Match the glove to your risk assessment, check the fit, and replace gloves that are worn, torn or contaminated. The ratings are test results on the glove material and do not describe every hazard on your site.

Where this product is used

• Freezer rooms and cold climate work
• Power tool use, commercial fishing, construction and councils
• Wet and oily work where a water and oil repellent coating is wanted

Features

• Dyneema shell, cut level C
• 3/4 dip HPT foam coating, water and oil repellent
• Terry lining for warmth
• EN 511:2006 02X, contact cold level 2
• Sanitised with Actifresh
• EN 388:2016 3X42C

Key specifications

Choosing the right option

Choose the Cold Fighter where cut protection is needed in cold work. For a general winter lined glove see the Splendor winterlined glove, which has no cold rating.

Related Frontier products: Splendor winterlined glove, Smelter King gauntlet, Iguana nitrile cut glove, CoolTec5 hi-vis cut glove.