Galmet® Keytite® Etch Primer 350g
Available
Galmet Keytite Etch Primer is a single pack epoxy etch primer designed to etch and passivate ferrous and non-ferrous metals and galvanized iron. It has excellent adhesion and barrier properties over Galmet Cold Galvanizing and other zinc coatings before topcoating with Galmet RustPaint, Hammered Metal Finish or SprayPaint.
This 350g aerosol suits galvanized iron, iron and steel, aluminium, stainless steel, copper and alloys. It dries fast for a same day topcoat, allows recoating after 2 hours and suits most single-pack, two-pack and industrial topcoats. Galmet is made in Australia by ITW Polymers & Fluids at Wetherill Park, NSW.
Where this product is used
- Etch priming galvanized iron
- Priming bare steel and stainless steel
- Priming aluminium, alloys and copper
- Priming over DuraGal and other zinc coatings
Features
- Single pack epoxy etch primer that etches and passivates ferrous and non-ferrous metals
- Excellent adhesion and barrier properties over zinc coatings such as Galmet Cold Galvanizing
- Fast dry with same day topcoat and recoating after 2 hours
- Suits most single-pack, two-pack and industrial topcoats
- Two full coats on mild steel for a minimum dry film thickness of 25 microns, one coat on non-ferrous metals
- Recommended dry film thickness of 10 to 15 microns
- Shake for at least 1 minute after the agitator ball moves and often during use
- Apply with smooth even strokes holding the can approximately 25cm from the surface
- Treat rust that cannot be removed with Galmet Ironize after wire brushing, on the rusty areas only
- It is classified as an aerosol (Category 1), UN 1950 Aerosols, Class 2.1, extremely flammable. See the SDS before use
Key specifications
| Specification | Detail |
|---|---|
| Brand | Galmet |
| Product | Keytite Etch Primer, aerosol |
| Pack | 350g aerosol |
| Type | Single pack epoxy (vinyl epoxy) etch primer |
| Anti-corrosive pigment | Zinc phosphate |
| Suitable for | Galvanized iron, iron and steel, aluminium, stainless steel, copper, alloys |
| Recoat | 2 hours |
| Dry film thickness (recommended) | 10 to 15 microns |
| Mild steel | Two full coats for a minimum dry film thickness of 25 microns |
| Non-ferrous metals | One coat |
| Topcoats | Galmet RustPaint, Hammered Metal Finish and SprayPaint, and most single-pack, two-pack and industrial topcoats |
| Hazard | Extremely flammable aerosol, pressurized container may burst if heated, causes skin and serious eye irritation, may cause drowsiness or dizziness |
| Dangerous goods | UN 1950 Aerosols, Class 2.1 |
| Part number | GKEGA350 |
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Galmet® Keytite® Etch Primer 350g
SKU: A0123887 | Model: GKEGA350
This is the 350g aerosol of Galmet Keytite Etch Primer. It is a single pack epoxy etch primer designed to etch and passivate ferrous and non-ferrous metals, with recoating after 2 hours and a same day topcoat.

