Garrick GLHLL075 Lever Hoist Load Limited 0.75T x 1.5m Lift

The Garrick Lever Hoist Load Limited is an all steel lever hoist with factory-set overload protection, in 0.75T, 1.5T, 3T and 6T capacities with a 1.5 m lift. It uses Grade 80 alloy load chain in 6.0 mm, 7.1 mm or 10.0 mm by capacity, with a spring safety latch on every hook.

A test certificate and instruction manual are supplied with every hoist. The manufacturer states that the hoists comply with AS/NZS 1418.2.

Where this product is used

• Lifting, lowering and positioning loads by hand where a lever hoist is wanted, including confined or awkward spaces.
• Tensioning and pulling in rigging and maintenance work where the rated capacity suits.

Features

• Overload protection factory set, designed to prevent abuse, damage or unsafe practice
• Robust all steel construction
• Super strength alloy load chain, Grade 80
• Spring safety latch fitted to all hooks
• Durable stainless steel labels
• Test certificate and instruction manual supplied with every hoist
• Manufacturer-stated compliance: AS/NZS 1418.2

Key specifications

Selecting the right option

Select the capacity so the load never exceeds the rated capacity, allowing for the lift geometry and any shock loading. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards. If you are unsure what suits your lift, contact AIMS or a qualified rigger before ordering.

Related products

For lighter loads see the Garrick mini lever hoists. To hang a hoist from a beam see the Garrick girder clamps and Garrick push trolleys.