Gates PowerGrip HTD Belt 3, 350-5M-09

Gates HTD timing belts 3M section use a curved tooth profile for improved load distribution and higher torque capacity than trapezoidal timing belts. They are a well-established standard for industrial synchronous drives where moderate-to-high torque transmission is required.

Where this product is used

• 3M and 5M sections: domestic appliances, office machines, electric hand tools and processing/chemical industry equipment
• 8M, 14M and 20M sections: machine tool, paper and textile industry drives needing durability and low maintenance
• Any roller chain drive being converted to a lower-maintenance belt system

Features

• Curvilinear (rounded) tooth profile - more torque capacity than classical
• Fiberglass tensile cord for stretch resistance
• Common pitches: 3M (3mm), 5M (5mm), 8M (8mm), 14M (14mm)
• Higher load ratings than classical PowerGrip

Key specifications

Choosing the right option

Select by pitch (2MGT/3MGT/5MGT for GT3; 3M/5M/8M/14M/20M for HTD) and belt width to suit your drive, or cross-reference by pitch length + pitch + width (e.g. 600-5MGT-15 = 600mm pitch length, 5MGT pitch, 15mm wide). See our Poly Chain GT Carbon range.